CRYSTORAMA 4409-CH-CL-MWP 9 Light Crystal Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION
MODEL #4409-CH-CL-MWP
DETAILED ILLUSTRATION
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 9-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE The fixture is dry rated
How to Install
- Do a complete inventory of all parts and components before you start installing.
- Screw the top glass dish & Loop on the coupling.
- Place the glass dish and small metal dish over the bottom metal cover and secure with the finial.
- After safety attaching fixture into outlet box, install babiches, bulbs (not included) and proceed to connecting the power.
- When you begin to dress the fixture, start with packet labeled(A).
- IMPORTANT: Apply crystal sets in alphabetical order.
Crystal Sets
A. 45Sets. (1)14mm + AS9-1.5″
B. 5Sets. (8)14mm + AS9-2″
C. 4Sets.
(4)14mm + AS9-2.5″
D. 4Sets. (6)14mm + AS20-3″
E. 12Sets. (1)14mm + AS20-3″
F. 8Sets. (1)28mm + AS9-3″
G. 4Sets. (8)14mm + (1)16mm Square + AS20-3″
H. 8Sets. (11)14mm + (1)16mm Square + AS9-2.5″
I . 8Sets. (12)14mm + (1)16mm Square + AS20-3″
J . 4Sets. (7)14mm + (1)16mm Square + AS9-2.5″
K. 4Sets. (13)14mm + (1)16mm Square + AS9-2.5″
L . 4Sets. (7)14mm + (1)16mm Square + AS20-3″
M. 1Piece. (8)14mm + AS8-50mm Ball
WARNING: This product can expose you to Lead, which is known to the State
of California to cause cancer and/or birth defects or reproductive harm. For
more information go to www.P65Wamings.ca.gov
Part Number
Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting Plate
C. (2)-Outlet Box Screws
D. (1)-Lock washer
E. (1)-Hex Nut
F. (1)-Nipple
G. (1)-Canopy; w5″ x h1″ (XFB4405CHCAN5IN)
H. (1)-Collar Ring
I. (1)-Collar Loop
J. (1)-Chain; 72″, 4mm (XFB4405CHCHA4MM)
K. (1)-Ground Wire
L. (1)-Loop
M. (1)-Dish; Ø5″, 13mm hole, 5pin (XFB4409CHDIBOB5IN)
N. (1)-Dish; Ø4″, 11mm hole (XFB4409DIBOB4IN)
O. (1)-Center Babiche; Ø4″, 26mm hole (XFB4409DIBOB4INA)
P. (1)-Dish; Ø4″, 11mm hole, 5pin (XFB4409CHDIBOB4IN)
Q. (2)-Small Metal Dish
R. (2)-Finial (XFB4405CHFIN)
S. (4)-Frame
T. (1)-Candle Sleeve; h2″ (XFB4409CDL2IN)
U. (8)-Candle Sleeve; h4″ (XFB4418CDL4IN)
V. (8)-Babiche; Ø5″, 26mm hole, 5pin (XFB4418CHBOB5IN)
W. ( )-Rosette
PART Bag: Includes Parts A, C
PART BAG Ⅱ: Includes Parts B, E, F, H, I, D
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>