msi MAG FORGE 110R Mid Tower Gaming PC Case User Guide

msi MAG FORGE 110R Mid Tower Gaming PC Case

Accessories

Item

| Name|

Used for

---|---|---
| Cable ties x5| Cable management
| Screw #6-32 10mm x2| Securing drive tray
| Screw #6-32 6.5mm x4| Motherboard Stud
| Screw M3 5mm x20| Motherboard / SSD
| Screw #6-32 6mm x6| PSU / PCIe Card
| Screw #6-32 5mm x10| 3.5” HDD
| 1 to 3 fan splitter cable x1
(MAG FORGE 112R only)| Connect 3 fans

Specification

Rear: 1x 120 mm ARGB fan MAG FORGE 112R
Rear: 1x 120 mm ARGB fan
Front: 3x 120 mm ARGB fans
Material| Chassis: Steel (SPCC 0.5 mm)
Right Side Panel: Steel
Front Bezel: Plastic + Mesh MAG FORGE 110R
Left Side Panel: Transparent acrylic MAG FORGE 111R / 112R
Left Side Panel: Tempered glass
Dust Filters| Top: Magnetic frame dust filter PVC mesh
Bottom dust filter
Fan Support| Top: 2x 120 mm / 2x 140 mm
Front: 3x 120 mm / 2x 140 mm
Rear: 1x 120 mm
Drive Bays| 3 x 2.5” SSD mounting brackets (1 SSD tray & 2 with screw only)
2 x 3.5’’ + 2.5’’ combo HDD tray
Expansion Slots| Supports 7 expansion slots
10 Panel| 1x LED switch button
2x USB 3.2 Gen1 Type A ports
1x Mic-in jack
1x Line-out jack
1x Reset button
1x Power button
Radiator Support| Top: 120/ 240 mm
Front: 120 / 140 / 240 mm
Rear: 120 mm
Clearance| CPU Cooler Height: Max 160mm (6.3 inch)
Graphics Card Length: Max 330 mm (12.99 inch)
PSU Length: Standard ATX 160mm (6.3 inch) Max 200 mm (7.87 inch) without 3.5” HDD tray installed
Case Dimensions| 409(D) x 214(W) x 485(H) mm
16.1(D) x 8.43(W) x 19.09(H) inch
Motherboard Support| ATX/ M-ATX/ ITX

Case Features

Side & Front View

IO Panel

1. LED switch button
2. USB 3.2 Gen 1 Type-A
3. Mic-in
4. Line-out
5. Reset button
6. Power button

SSD, HDD Installation

Opening the Left & Right Side Cover

Motherboard Installation

Graphics Card Installation

PSU Installation

Control Board Specification

1x SATA power connector
1x MSI motherboard JRAINBOW connector
6x 3-pin ARGB LED connectors
ARGB Pin Definition|
LED Effects (1 short press the LED switch)| LED effect cycle:

1. Rainbow
2. Seven-color trailing
3. Seven-color gradient
4. Violet
5. White
6. Blue
7. Cyan 8. Green
8. Yellow
9. Red
10. Rainbow breathing
11. Red breathing
12. Yellow breathing
13. Green breathing
14. Cyan breathing
15. Blue breathing
16. White breathing
17. Violet breathing
18. Fixed rainbow
19. Red 21. Yellow
20. Green
21. Cyan
22. Blue
23. White
24. Violet

ARGB Fan Connection

LED switch control description:

1. Short press the LED switch once to switch the LED effect

2. Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode.
   Short press once to back to the Hub control mode.

3. Press and hold the LED switch for 6 seconds to turn off the LED.

Note

• Support up to 128 LEDs, Exceeding this limit will lead to overheating, abnormal color or no light.

Note

Support up to 128 LEDs, Exceeding this limit will lead to overheating, abnormal color or no light. 128 LED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>