X-MAKER Joy Starter Toy 3D Printer User Guide
- August 14, 2024
- X-MAKER
Table of Contents
Quick Guide
Scan
QR code to get started
https://www.aoseed.com/pages/guide-xmaker-joy-en
Packing List
App Download and Installation
-
For Android Tablet / iPad / Smartphones
https://www.aoseed.com/pages/apps-downloads
Or search “XMAKER’ in Googleplay / App Store -
For Windows PC
https://www.aoseed.com/pages/apps-downloads -
For Windows PC
https://www.aoseed.com/pages/apps-downloads
X-PRINT is 3D slicer software available only for Windows.
Connect 3D Printer
- Keep your hands dry. Take out the adapter and connect the power. Switch on the “Power Switch”.
- Open the X-MAKER App and select X-MAKER JOY.
- Long press the red “Reset Button” until you hear a beep. The indicator light will turn solid yellow.
- Enter the correct Wi-Fi password, then tap Connect (ensure the Wi-Fi frequency is 2.4GHz).
Connection Failed
Ensure the printer and devices are connected to the same 2.4GHz Wi-Fi
network.
Restart the App or Printer, then try connecting again later.
How to Star
Install the Filament
- Remove the nozzle protective foam.
- Insert the holder into the placement hole, and put the filament spool on the holder.
- Push the orange handle upward a little, then insert the filament tip into the inlet unitl the filament enters into the Extruder.
- Go to App > Printer Settings > Load. Click “Load”. Then the nozzle will be automatically heated. The filament will be loaded then and the loading completes until the filament comes out from the nozzle.
**** Cut the filament aslant and make it straightened.
Place the Base Plate
- Ensure the base plate is clean & flat, and aligned with the platform.
Model Printing and Removal
- Easy-to-use one-click printing with the X-MAKER App.
- X-MAKER App > Things, one-click printing.
- X-MAKER App > Theme (or Design), DIY your own model to print.
• Quick Swap Nozzle
- Unload the filament.
- Wait for the nozzle to cool down to below 45 °C.
- Press the orange button and take off the nozzel with a lithe force.
• Indicator Light
Notes
- AOSEED filaments are recommended. Do not frequently change filaments of various brands to avoid nozzle jamming.
- Please note that the app versions available for installation may vary on different platforms.
- Recommended ambient temperature for using the printer is 0-35 °C. Please turn off the printer when not in use.
- For more information, please visit www.aoseed.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>