BUILTBRIGHT BB6110A Work Bar Strobe 4 Slim Installation Guide
- July 26, 2024
- BUILTBRIGHT
Table of Contents
BUILTBRIGHT BB6110A Work Bar Strobe 4 Slim
SPECIFICATIONS
- Input Voltage: 12-24VDC
- Operating Current: 0.96A @ 12VDC
- Operating Temperature: -40° to 149°F (-40° to 65°C)
INCLUDED
- 1x LED light bar
- 1x Mounting Bezel
- 1x 3M VHB tape
- 1x Mounting Gasket
- Mounting hardware
INSTALLATION
- Mount to a flat surface or one with minimal curvature.
- Mark drill hole locations on the mounting surface using the gasket or VHB tape as a template.
- Drill a 25/32” (20mm) hole for the wires protruding from the rear of the unit at the correct location. Deburr any sharp edges from this hole.
- Mount the light along with the mounting gasket. Use the self -tapping screws provided to secure the light. Cover with mounting bezel.
WIRING
Black – To chassis ground
White – To +VDC and memory function 1 (fuse @ 2A)
Gray – To +VDC and memory function 2 (fuse @ 2A)
Red – To +VDC and memory function 3 (fuse @ 2A)
Yellow – Pattern selection
- Apply YELLOW wire to +VDC:
- Less than 1 second for next pattern
- 2-4 seconds for previous pattern
- 7+ seconds for steady burn
- Synchronization: After setting each light at the right pattern, connect yellow wires of all light heads together.
- Phase Operation: Phase 1 flashes simultaneously with Phase 1, Phase 2 flashes simultaneously with Phase 2, Phase 1 alternates with Phase 2 (Up to 8 units can be synchronized.)
TABLE
FLASH PATTERNS
1| Single Flash,ECE R65 Phase 1
2| Single Flash, California Title 13 Phase 1
3| Double Flash Phase
4| Triple Flash Phase 1*
5| Single Flash,ECE R65 Phase 2
6| Single Flash, California Title 13 Phase 2
7| 7 Double Flash Phase 2
8| 8 Triple Flash Phase 2
9| Quadruple Flash Phase 1
10| 0 Quadruple Flash Phase 2
11| Quintuple Flash Phase 1
12| Quintuple Flash Phase 2
13| Combination Single/Double Flash Phase 1
14| Combination Single/Double Flash Phase 2
15| Combination Single/Triple Flash Phase 1
16| Combination Single/Triple Flash Phase 2
17| Combination Single/Quintuple Flash Phase 1
18| Combination Single/Quintuple Flash Phase 2
19| Single Flash Left/Right Split
20| Strobe
21| Cruise(20%)
22| Steady Burn
WARRANTY
ARC Lighting provides a 5 year warranty against manufacturing defects from date of purchase. If warranty service is needed, please contact the authorized dealer of where your product(s) were originally purchased.
WARNING: CANCER AND
REPRODUCTIVE HARM WWW.P65WARNINGS.CA.GOV
CUSTOMER SUPPORT
Phone: 888-608-2220
Email: support@arc.lighting
Website: www.arc.lighting/warranty-claim
BASTROP, TEXAS 78602
UNITED STATES OF AMERICA
WWW.BUILT-BRIGHT.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>