Yealink W59R DECT Handset User Guide

June 12, 2024
Yealink

Yealink logo Quick Start Guide
Yealink W59R DECT handsetYealink W59R DECT Handset picture
2

W59R DECT Handset

  1. Yealink W59R DECT Handset - partsReceiver: incoming audio

  2. Power LED: indicates call-, message- & charging status

  3. Phone screen: shows information

  4. Soft keys: access the function directly, depending on the operating situation

  5. Message key: access voice mail or missed call

  6. Speakerphone key: switch among the receiver, headset, and handsfree modes, answer an incoming call or place a call in handsfree mode

  7. Navigation key: scroll through information or options on the screen

  8. OK key: confirm actions or enter the main menu

  9. On-hook & Power ON/OFF key:
    • Press briefly to return to the previous screen
    • Long press to return to the idle screen
    • Press to turn the handset on
    • Long press on the idle screen to turn the handset off
    • Cancel actions, end a call or reject an incoming call

  10. Off-hook key:
    • Answer an incoming call
    • Enter the redial calls list
    • Place a call in receiver or headset mode

  11. Keypad: provides digits, letters, and special characters

  12. TRAN key: transfer a call to another party

  13. Mute key: toggle mute feature on or off

  14. Microphone: picks up audio and sends to receiving caller

  15. Speaker: output audio in handsfree mode (back side)

  16. Volume key +/-: increase and decrease volume (side)

  17. Emergency alarm button: (on top of the handset) long press 2 sec to set off the emergency alarm

Yealink W59R DECT Handset picture 1

Handset registration

  1. Make sure the handset is fully charged.

  2. To register the handset to the DECT Manager:
    please call: 073 – 751 77 77
    or email: support@lumidee.nl

  3. After registration mode is enabled on the DM base station you can proceed to register one or more handsets.

  4. Press the ‘Reg’ soft key (4) on the handset. The registration process will be completed automatically.

Resetting the handset registration

When a handset was registered to another DM or base in the past, you will need to reset the handset:

  1. Press OK (8) to enter the main menu and select ‘Register Handset’.
  2. A list of available base units (that you have not yet registered with) will show.
  3. Select the one you want to register with and press the ‘OK’ soft key (8).
  4. Enter the base PIN (default is 0000) and press the ‘Done’ (4) soft key to complete the registration.

Renaming the handset

  1. Press OK (8) to enter the main menu and select Settings > Handset Name.
  2. Edit the name in the ‘Rename’ field.
  3. Press the ‘Save’ (4) soft key to accept the change.

Using the handset in Push-to-Talk mode

  1. Press and hold the mute button (13) for 3 sec to use the handset in the Push-to-Talk group.
  2. Soft key (4) shows ‘Lock’ to keep PTT-mode open.

Pairing a headset to the DECT handset
You can also pair a headset with the handset. The headset will get the same extension number as the handset. Please contact us (see point 2).

Yealink logoDe Ring 9 | 5261 LM Vught
The Netherlands
+31 (0) 73 624 03 75
info@lumidee.nl 
www.lumidee.nl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals