TOPDON CarPal Bluetooth Vehicle Diagnostic Dongle User Guide
- July 22, 2024
- TOPDON
Table of Contents
CarPal
Quick User Guide
- Full System Diagnosis
- Smog Check
- 6 Maintenance Services
| TEL| 86-755-21612590
1-833-629-4832 (North America)
---|---|---
| EMAIL| SUPPORT@TOPDON.COM
| WEBSITE| WWW.TOPDON.COM
| FACEBOOK| @TOPDONOFFICIAL
| X| @TOPDONOFFICIAL
*This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
*Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Thank you for purchasing the TOPDON CarPal. This quick user guide will walk you through the basic setup and operation of the CarPal wireless diagnostic dongle. For the best user experience, carefully read and follow all the instructions and warnings.
[1] Download & Install the APP
Please go to the App Store or Google Play and search for the “ TopDon CarPal ” to download and install the App.
[2] Register & Log In
Log In to your account using your email and the verification code you received. (If you do not have an account, your email address will be used to register an account automatically the first time you log in.)
[3] Add the VCI
To add a device for the first time, tap Add Device.
If you need to add more devices, tap Mine > VCI Management > Add VCI.
[4] Plug the CarPal into the vehicle’s OBD-II port.
- Car OBD-II Interface
The vehicle’s OBD-II port is usually located under the dashboard.
[5] Turn the ignition to the “ON” position.
The red LED light on the CarPal indicates it is powered on.
[6] Bluetooth Connection
- Car OBD-II Interface
- Bluetooth
When the LED light is solid green, you can begin the Bluetooth connection. When connection is established, the LED light on the device will turn solid blue, and the VCI will be activated automatically.
[7] Your CarPal is now ready for use.
[8] Start the first vehicle health check.
Tap Vehicle Health Check to start the first vehicle health check and get your vehicle’s rating.
Update
The installed vehicle-specific software can be seen on the software download
page. When a new version is available, an Update button will display. Tap
the button to update the software.
For firmware updates, tap Mine > Firmware Update to update the firmware if
a new version is available.
FAQ
Q: What should I do if a communication error occurs?
A: Follow the steps below to identify the problem:
- Check if the ignition is ON.
- Check if the CarPal is securely plugged into the vehicle’s OBD-11 port.
- Turn the ignition off. Then, turn it on after 10 seconds and continue the operation.
- Check if the vehicle’s control module is defective.
Q: What special functions does the CarPal support?
A: The CarPal supports 6 special functions, including Oil Reset, Throttle
Reset, EPB Reset, BMS Reset, TPMS Reset, and DPF Regeneration.
Q: Do I need to update the firmware before using it for the first time?
A: Yes. Firmware will automatically update to the latest version once the
CarPal is connected with your phone via Bluetooth. You can also tap Mine >
Firmware Update to update the firmware manually.
Q: Can multiple devices be bound to one TopDon CarPal App account?
A: Yes.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>