MOUNTUP MU0012 TV Wall Mount Instruction Manual
- June 12, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU0012 TV Wall Mount
Product Information
- Product Name: TV Wall Mount
- Model Number: MU0012
- Included Hardware: Velcro cable ties x5, Bubble level x1, Mounting template x1
- Maximum VESA Size: 600mm/24″ (horizontal) and 400mm/16″ (vertical)
- Maximum Weight Capacity: 100 lbs (45.5 kg)
- Recommended TV Mounting Height: 42 inches from the center of the TV to the floor
- Installation Compatibility: Wood stud and solid concrete walls
Product Usage Instructions
- Step 1 – Install Wall Plate:
- Identify a suitable location on the wall for mounting the TV.
- Ensure that the wall is made of wood stud or solid concrete, as this product is not suitable for drywall alone.
- Using appropriate tools, securely attach the wall plate to the chosen location on the wall.
- Step 2 – Attach Bracket to TV Back:
- Identify the VESA mounting holes on the back of your TV.
- Select the correct bracket size from the included hardware based on your TV’s VESA specifications.
- Align the bracket with the VESA mounting holes and securely attach it to the TV using the provided screws.
- Step 3 – Hang TV onto Wall Plate:
- Carefully lift the TV with the attached bracket.
- Align the bracket hooks with the wall plate and carefully lower the TV onto the wall plate.
- Ensure that the TV is securely attached to the wall plate and properly leveled using the included bubble level.
Important Safety Precautions:
- Do not mount the TV on drywall alone; ensure the wall is capable of supporting five times the weight of the TV and mount combined.
- Follow the provided instructions carefully to avoid incorrect installation, assembly, or misuse that may lead to product damage or body injury.
- Keep small hardware items, such as screws, away from children as they can be a choking hazard if swallowed.
- Before starting assembly, verify that all parts are included and undamaged. Contact us if there are any parts shortages or damages.
Please consult this user manual for detailed installation instructions. If you have any doubts or concerns about the safety of the installation, assembly, or use of this product, please contact us for assistance.
INSTALLATION INSTRUCTION
If have any questions, Contact us.
Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
- This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by MOUNTLJP.
- Incorrect installation may result in product damage or body injury. MOUNTLJP shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.
Must Check Before Getting Started
Installation Tools
(Not Included)
Hardware Included
Step 1-1 Select TV screw diameter
Thread screws by hand into the threaded holes on the back of your TV to
select which screw diameter fits your TV.
Step 1-2 Select TV screw length
When attaching brackets to the flat screen, be careful not to over tighten
screws and be sure that screws do not bottom out in the mounting holes
.
Step 1-3 Attach the bracket
CAUTION: Ensure bracket is securely fastened before moving on to the next
step.
Step 2A Wall plate installation (wood stud)
- Locate your studs. Verify and mark the center of the studs by finding the stud edges using an awl, a thin nail, and an edge-to-edge stud finder
- Position the mounting template at your desired height and line up the holes with your stud center line. Level the mounting template and mark the pilot hole locations.
Install wall plate 1 using lag bolts A with Socket Wrench, NO Electrodrill. Tighten the lag bolts A until they are pulled firmly against the wall plate 1.
Step 2B Wall plate installation (concrete or brick)
Position the mounting template at your desired height , level the mounting
template and mark the pilot hole locations x4
Install wall plate 1 using lag bolts A and anchor (not included). Tighten the lag bolts A until they are pulled firmly against the wall plate 1.
Step 3 Install front support and extensions
Install the extensions [03] to Front support [02] with the pre-assembled screws.
Hang 02 onto 01 and using a screwdriver to secure with pre-assembled screws P1 and washer P2
Step 4 Hang TV with bracketsonto the arm extensions
Adjustments
Product dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>