MOUNTUP MU0015 TV Wall Mount Full Motion Instruction Manual

June 12, 2024
MOUNTUP

MOUNTUP MU0015 TV Wall Mount Full Motion

Product Information

  • V3
  • Velcro cable ties X5
  • Bubble level X1
  • Mounting template X1
  • Max weight capacity: 154LBS (70KG)
  • Compatible TV sizes: Max – 800x400mm / 31.5×16, Min – 200x100mm / 8×4
  • Designed for use in wood stud or solid concrete wall. DO NOT install into drywall alone.

Product Usage Instructions

  1. Select TV screw diameter:
    • Thread screws by hand into the threaded holes on the back of your TV to select which screw diameter fits your TV.
    • The available screw diameters are M4, M6, and M8.
  2. Safety Caution:
    • Please read the instruction carefully before installation.
    • If you have any doubts about the safety of the installation, assembly, or use of this product, please contact us.
    • This product is designed for use in wood stud or solid concrete wall. DO NOT install into drywall alone.
    • The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage or body injury.
    • WARNING: This product contains small items that could be a choking hazard if swallowed.
    • Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.
  3. Must Check Before Getting Started:
    • Make sure the TV size is within the maximum limits: 800mm/31.5 (width) and 400mm/16 (height).
    • Ensure that the weight of the TV does not exceed 154LBS (70KG).

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-1

If you have any questions, please feel free to contact us via Amazon.
Warm Tips
You could also refer to the Video Guide about installation on our product page.

Safety Caution

Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

  • This product is designed for use in wood stud or solid concrete wall.
  • DO NOT install into drywall alone.
  • The wall must be capable of supporting five times the weight of the TV and mount combined.
  • Incorrect installation may result in product damage or body injury.

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.

Must Check Before Getting Started

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-3

Installation Tools

(Not Included)MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-
FIG-4

Hardware Included

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-5MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-6

Step 1-1 Select TV screw diameter
Thread screws by hand into the threaded holes on the back of your TV to select which screw diameter fits your TV.MOUNTUP-MU0015-TV-Wall-Mount-Full-
Motion-FIG-7

Step 1-2 Select TV screw length
When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes .MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-8

Step 1-3 Attach the bracket
CAUTION:
Ensure bracket is securely fastened before moving on to the next step.MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-9MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-10

Step2A Wall plate installation (wood stud) Locate your studs. Verify and mark the center ofthe studs by finding the stud edges using an awl, a thin nail, and an edge-to-edge stud finder.

Position the mounting template at your desired height and line up the holes with your stud center line. Level the mounting template and mark the pilot hole locations.

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-13 IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in (70 mm). Be sure to drill into the centerofthe stud.MOUNTUP-MU0015-TV-Wall-Mount-Full-
Motion-FIG-14

Step 2B Wall plate installation (concrete or brick)

Position the mounting template at your desired height , level the mounting template and mark the pilot hole locations x4.MOUNTUP-MU0015-TV-Wall-Mount-
Full-Motion-FIG-16MOUNTUP-MU0015-TV-Wall-Mount-
Full-Motion-FIG-17

  • To prevent the TV falling down, the Arrow Must Keep UP at this step!!

Use the included wrenchßwhen have not socket wrench in hand.
Install wall plate using lag bolts and anchor (not included). Tighten the lag bolts O until they are pulled firmly against the wall plate

STEP 3 Install front support and wall bracket together
Install the End Caps to Front Support with the preassembled screws .MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-18

Install front support and wall bracket togetherMOUNTUP-MU0015-TV-Wall-Mount-
Full-Motion-FIG-19

STEP 4 Hang TV with brackets onto the arm extensionsMOUNTUP-MU0015-TV-
Wall-Mount-Full-Motion-FIG-20

Adjustments

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-21MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-22

Product dimension

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-23

MOUNTUP-MU0015-TV-Wall-Mount-Full-Motion-FIG-24

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals