MOUNTUP MU3005 Triple Monitor Desk Mount for 13 to 32 Inches Monitors Instruction Manual
- June 12, 2024
- MOUNTUP
Table of Contents
- Safety Caution
- Before Starting Assembly
- Hardware Included
- Step 1A Clamp Installation
- Step 1B Grommet Base Installation
- Step 2 Attach the VESA plates to the monitors
- Step 3 Attach the monitors to the stand
- Step 4 Tilting Adjustment
- Step 5 Switch screen horizontally and vertically
- Manage tools and cables
- Set the desired angle of the monitors
- Product dimensions
- Customer Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MOUNTUP MU3005 Triple Monitor Desk Mount for 13 to 32 Inches Monitors
Each Monitor
|
75x75mm
100x100mm
---|---
Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, please contact us.
WARNING: This product contains small items that could be a choking hazard
if swallowed.
KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
Before Starting Assembly
When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.
| Do not tighten the screws excessively or your monitor might be damaged.
---|---
Hardware Included
All are included in 01A
Monitor Kit
Step 1A Clamp Installation
-
Assemble the upper pole 02A and the lower pole 02B together
-
Secure the L plate 01B to the lower pole 02B with the preassembled screws.
-
Secure the clamp bracket to the L plate with the screws **06
**
Step 1B Grommet Base Installation
-
Assemble the upper pole 02A and the lower pole 02B together.
-
Dis-assemble the clamp bracket. the marked parts a and b will be used in next step.
-
Assemble the round plate 01C to the lower pole 02B with the preassembled screws.
-
Position pole assembly on the desk then secure it by tightening the knob bolt after making knob bolt b through the Long plate a , desk hole, and the bottom of pole assembly sequentially.
Step 2 Attach the VESA plates to the monitors
-
(a) For Flat Back
-
(b) For Recessed / Curved Back
Step 3 Attach the monitors to the stand
-
Assemble the arm 05 and the pole together.
-
Fasten the bolt with 5mm Allen key 05C . Attach the cable clips 07A and 07B to the stand.
-
Slide the monitor head 03A down and tighten the bolt to secure it
Hang the monitors onto the monitor arm then using the 3mm Allen key 07B to turn the screws L to adjust the monitors to the same level if necessary.
Repeat the previous step to secure the third monitor to the stand via fastening the safety screw
Step 4 Tilting Adjustment
Loosen tilting bolts, pull monitor to your desired angle, then fasten tilting bolts with the 5mm Allen key.
Step 5 Switch screen horizontally and vertically
If needed, the monitor can be rotated ±90 degrees for switching screen between horizontally and vertically for turn the monitors directly.
360° Rotation
This function works better for monitors with the center of gravity.
Note: To ensure stability, the tightness of the rotation axis is preset,
so it need take some effort to rotate the VESA Plate.
Suggestion: Please attach the monitor first, then hold the two sides of
it with both hands, and rotate vigorously. If that doesn’t work out, please do
not hesitate to ask for our help via Amazon.
Manage tools and cables
Set the desired angle of the monitors
Product dimensions
Customer Support
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>