MOUNTUP MU0031 Universal TV Stand Table Top TV Stands Instruction Manual
- June 12, 2024
- MOUNTUP
Table of Contents
MU0031 Universal TV Stand Table Top TV Stands
Instruction Manual
INSTALLATION INSTRUCTION
(YZ2210-US1)
If you have any questions, please feel free to contact us via Amazon.
Safety Caution
BEFORE ASSEMBLY
- Layout all components and hardware. Check all parts are included and undamaged.
- Should anybody intends to install or use this TV stand, please read and understand this manual carefully.
- If you do not understand these instructions or have any doubt about the safety instructions, assembly or use of this product, please contact our customer service.
WARNING
- This product contains small items that could be a choking hazard if swallowed.
- KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
- Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use.
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of TV or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Installation Tools (Not Included)
Supplied Parts and Hardware
Product Dimensions
STEP 1: Attach the Brackets to TV
1-1 Select TV Screw Length
Thread screws by hand into the threaded holes on the back of your TV after
selecting which screw diameter fits your TV.
1-2 Select TV Screw Length
When attaching plate to the flat screen, be careful not to over tighten screws
and be sure that screws do not bottom out in the mounting holes.
STEP 1: (Continued)
1-3 Attach the TV Brackets
STEP 2: Support Pillar Installation
Then insert 4pcs Bolts (E) through the holes of Support Pillars ( 2 & 3 ),
and use the 4mm Allen Key (K1) to tighten.
STEP 3: Apply Foot Pads to the Base
STEP 4: TV Plate Installation
4-1: Connect TV Plate 5 and Connecting Plate 6 by using and M5 Bolts
(J1), Washers (J2) and Nuts (J3). Use the Socket Wrench (K3) to tighten the
nuts.
4-2: Connect TV Plate
Unit and Angle Adjuster 7 by using and M6 Bolts (C1) and Nuts (C2). Use
the Wrench (K2) to tighten the nuts.
STEP 4: (Continued)
|4-3: Choose the appropriate position (three options) for your TV Plate,
then connect TV Plate Component to Support Pillar 2 by using Bolts (D1)
and Washers (D2). Use the 4mm Allen key (K1) to tighten them.
STEP 5: Attach TV with Brackets to TV Plate
STEP 6: Cable Management
STEP 7: Adjustments (If necessary)
- Slightly loosen tilting nuts with the Wrench (K2).
- Hold the TV with both hands and
- adjust TV to your desired tilt angle.
- Retighten tilting nuts to secure the TV in place.
Note: When tilted, if the TV sags or does not stay, and if the above method is useless, please feel free to contact our customer service.
Swivel Adjustment
Documents / Resources
|
MOUNTUP MU0031 Universal TV Stand Table Top TV
Stands
[pdf] Instruction Manual
MU0031 Universal TV Stand Table Top TV Stands, MU0031, Universal TV Stand
Table Top TV Stands, TV Stand Table Top TV Stands, Stand Table Top TV Stands,
Table Top TV Stands, Top TV Stands, TV Stands, Stands
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>