MOUNTUP MP0007 Tilting TV Wall Mount Instruction Manual

MOUNTUP MP0007 Tilting TV Wall Mount

Product Information

The product is a TV wall mount bracket, model number YZ2211-US1.
It is designed to securely attach a TV to a wood stud or solid concrete wall. The maximum weight capacity of the bracket is 99 pounds (45 kilograms). The bracket is compatible with TVs that have VESA mounting patterns ranging from 75x75mm (3×3 inches) to 400x400mm (16×16 inches).

Product Usage Instructions

Step 1: Attach the TV Brackets

Select the appropriate TV screws based on the size and weight of your TV. The available screw types are M6, M8, and M4.

• If the screws are too short, they may not securely attach the brackets to the TV.
• If the screws are too long, they may protrude from the TV and cause instability.
• Make sure the TV screws are vertical to ensure proper alignment.

Note: Please read the safety cautions and instructions carefully before proceeding with the installation.

Safety Caution

• This product should only be installed on a wood stud or solid concrete wall. Do not attempt to install it on drywall alone.
• The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage or personal injury.
• The product contains small items that could pose a choking hazard if swallowed.

Before Getting Started
Before starting the assembly, ensure that:

• The maximum VESA mounting pattern of the TV is 400mm x 400mm (16×16 inches).
• All parts required for installation are included and undamaged.
• If any parts are missing or damaged, do not return them to the dealer. Instead, contact the customer service team for assistance.
• Never use damaged parts during the installation process.

If you have any further questions or need assistance, please feel free to contact us via Amazon.

INSTALLATION INSTRUCTION

If you have any questions, please feel free to contact us via Amazon.

Safety Caution

Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

• This product is designed for use in wood stud or solid concrete wall.
  • DO NOT install into drywall alone.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Incorrect installation may result in product damage or body injury.
  WARNING: This product contains small items that could be a choking hazard if swallowed.
  Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged,do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!

Must Check Before Getting Started

Extra Tools You Need (Not Supplied)

Supplied Parts and Hardware

TV Screws / Spacers / Washers

NOTE: Not all parts and hardware included will be used.

ASSEBMLY

STEP 1 Attach the TV Brackets

1. Select TV Screws

2. Need Spacer?
   Yes, choose the appropriate screws, washers,and spacers for your TV.
   No, just choose the screws, washers.

3. Attach the TV Brackets

STEP 2 Attach Wall Plate to Wall

OPTION A: Wood Stud Installation

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is  securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Arrow Must Keep UP at this step!!

OPTION B: Solid Concrete Wall Installation

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Arrow Must Keep UP at this step!!

Install wall plate using lag bolts and washer with Socket Wrench, NO Electrodrill.

STEP 3 Adjustments

Tilting adjustment (-8°~0°)
Pull brackets to your desired angle then fasten 2 titing bolts with hand.

Option:
To keep TV in vertical position, please use two M4 screws to insert the holes on two brackets respectively (as shown in below image).

STEP 4 Hang and Secure TV to Wall Plate

1. Wall Plate Installation Integrity Test
   Before hanging TV, please conduct “wall plate installation integrity test” first.

2. Hang and Secure TV to Wall Plate

Take down the TV from the Mount (If necessary)

Product Dimensions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>