arzum Robotek X2 AR 4301 Robot Vacuum Cleaner Instruction Manual

arzum Robotek X2 AR 4301 Robot Vacuum Cleaner

Parts Overview

BOX CONTENTS

1. Robot Vacuum Cleaner and Automatic Water Tank
2. Charge Station
3. Adapter
4. Remote Control
5. Side Cleaning Brushes
6. Dust Container
7. HEPA filter
8. Cloth Mop
9. Cleaning tool

In order to obtain utmost results from your appliance, please ALWAYS read carefully this user’s manual and save it for further use.

IMPORTANT WARNINGS

• Make sure that the voltage indicated on your appliance corresponds with the main voltage in your available place. Our company shall not be held liable for any failures owing to any discrepancy and such failures shall not be covered by the guarantee.
• Your device is for household use only.
• Do not use for commercial or industrial purposes.
• Otherwise, inconvenient uses shall not be covered by the guarantee.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• To prevent harming your appliance do not use extension cords that supply insufficient current.
• ALWAYS unplug your appliance from outlet when not in use and before putting in or taking off any accessories and before cleaning and maintenance.
• NEVER use your appliance in wet surfaces and outside your home for vacuuming fluids, such as water etc.

CAUTION
Do not use your appliance for absorbing any flammable liquids such as gasoline, thinner, alcohol, kerosene, etc., as well as abrasive liquids (such as acids, etc. Do not let your appliance absorb burning cigarettes, active cigarette ashes or matchsticks Do not attempt to remove any sharp objects such as glasses, etc. Ensure not to move the appliance over its cord, which may damage to the insulation of the unit. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner, such as falling down, etc. Do not attempt to repair it by yourself. Immediately contact an Arzum Authorized

Service.
NEVER use your vacuum cleaner without the filters, dust collector cup or dust bag in place. Contact your Arzum Authorized Service for examination, repair and spare parts, and use original spares, accessories and dust bags only.

Parts of Appliance Remote Control

1. Display Screen
2. Return to Charge Station
3. Vacuum Cleaner Routing (Only runs in standby mode)
4. Suction Power Adjustment 1> Silent 2>Normal 3>Turbo
5. Water Dripping / Clock Setting 1> Low 2>Medium 3>High
6. Cleaning Schedule
7. On/Off Button
8. Area Cleaning Modes

INSTALLING AND CHARGING THE APPLIANCE

Assembly of the main unit:

Attach the side cleaning brushes included in the box to your vacuum cleaner.

ATTENTION
There are R and L marks on the brushes These marks show where the brushes are attached to your vacuum cleaner. Attach the brushes in accordance with the R and L marks located just above the wheel.

Charging Unit Installation

Plug the adapter into the charging unit. Mount the charging unit on the floor by leaning it against the wall and leaving 1 m on the sides and 2 m in the opposite.

WARNING
If you do not leave enough space around the charging unit, when your vacuum cleaner tries to reach the charging unit, it may not be able to do. Before placing your robot vacuum cleaner in the charging station, turn the On / Off (I / 0) button located on the side to the ON position (I)

ATTENTION
If you place your vacuum cleaner on the charging stand without turning it on, the start button  on the appliance will flash red and you will hear Please turn on the power switch voice prompt. When the charging process starts, the voice prompt Charging. start is heard and the battery indicator flashes red and blue alternately. When charging is complete, the battery indicator turns blue. When the charge level reaches a low during the sweeping process of your robot vacuum cleaner, the voice prompt “Please charge” is heard the audible and your vacuum cleaner automatically returns to the charging stand. This process may differ depending on the selected cleaning mode. When charging the product for the first time, please make sure the battery is fully charged.

NOTE
For the first three uses, the product must be charged continuously for 12 hours after the battery is completely discharged. The service life will vary depending on how the product is used and when the appliance is charged in accordance with the charging rules.

WARNING
You can charge your vacuum cleaner only with the charging adapter (included in the product box or provided by Arzum authorized services) and the charging stand. Charge your appliance at room temperature. The appliance should not be charged at temperatures below 0 ° C and above 40 ° C. The charger may become warm while charging the appliance.

OPERATING YOUR APPLIANCE

Place your vacuum cleaner on the charging station and make sure that the On / Off button on the side is in the open position..

ATTENTION
If the sweeping process was initiated without the charging station, your appliance will go into standby mode when the charge is out of.

Running on Robot

You can start cleaning in Automatic Mode by pressing the start button on your vacuum cleaner. Automatic Mode is designed to perform the cleaning process in the shortest time and most effectively..

Area Cleaning Modes

You can use different cleaning modes according to your needs via the remote control or the Arzum Robotek application. To make a mode selection with the remote control, firstly.

operate the appliance from the button. Your vacuum cleaner will leave the charging station. Then you can select the mode which you want by pressing the MODE button..

Mode 1

Automatic Mode: Thanks to its advanced mapping feature, Arzum Robotek allows to finish the area to be cleaned as soon as possible.

Mode 2

Edge Cleaning Mode: Your robot vacuum cleaner cleans only the edges of the area where it is located.

NOTE
If sweeping process is started without charging station in Mode 1 and Mode 2, the appliance returns to the starting point when the sweeping is completed.

Mode 3

Maximum Area Mode: Your appliance first moves in a zig-zag pattern, after passing over the edge of the area where it is located, switches the random mode and complates the sweeping process by passing over the entire of area to be swept.

Mode 4

Random Cleaning Mode
Your vacuum cleaner make the sweeping process by moving randomly.

WARNING
Since an advanced mapping function is not used in this mode, it causes to increase the cleaning time.

Mode 5

4m2 Area Mode: Your appliance cleans the 4m2 area around it 2 times and then stops.

Note
When cleaning is completed in Mode 5, your vacuum cleaner does not return to the charging station. You can direct your vacuum cleaner to the charging station by pressing the return to charging station button on the remote control.

Mode 6

Intense Mode: The Robot Vacuum Cleaner passes over the area to be cleaned several times and provides deep-cleaning.

Ultra Intensive

Cleaning Your vacuum cleaner first starts to clean the area around the place where it is operated by drawing spiral movements and passes over the area many times, provides ultra-intensive cleaning.

Scheduled Cleaning

You can make scheduled cleaning via remote control or Arzum Robotek application. Scheduled Cleaning run only in Automatic Mode (mode). Firstly, Set the time and day of the remote control. Press the Water Dripping Clock Setting button on the remote control for a long time. When the clock on the screen starts to flash, you can set the time and day with the arrow buttons on the remote control. Press and hold the cleaning schedule button for making the schedule. The day information will start to flash on the screen Select the desired day with the arrow buttons (<>) and then press the Start button. Set the hour and minute for the desired cleaning time. Press the start “ “ button again.

NOTE
The cleaning schedule will be repeated every week, unless you cancel it.

Viewing the Cleaning Scheduled:

Press the schedule button on the remote control. You can switch to the desired day with the arrow keys and see the cleaning scheduled.

Canceling the Cleaning Scheduled:

• Press and hold the schedule button to make the Schedule The day information will start to flash on the screen
• Press and hold the Cleaning Schedule button to cancel the cleaning schedule.
• Day information will start to flash on display screen.
• Press the left button < once and make all weekdays flash on the display screen.
• Then press the Start button.
• All days of the week, the clock and clock logo will start to flash on the display screen.
• Press the cleaning schedule button, your cleaning schedule will be canceled.
• Select the desired day with the arrow buttons (<>) and then press the Start button. Set the hour and minute for the desired cleaning time.
• Press the schedule button again.

Adjusting Suction Power

Your appliance has 3 different suction power adjustment. You can adjust the suction power by pressing the suction power adjustment button which is placed on the remote control or via the Arzum Robotek application.

• 1 > SILENT: Low suction power and longest running time
• 2 > NORMAL: Normal suction power and running time
• 3 > TURBO: High suction power and shortest running time

NOTE
If you are using carpets, rugs etc. in the area to be cleaned, we recommend that you use the “Turbo” suction power adjustment.

Using the MOP (Wipe) Function

To use the mop function, attach the mop cloth to the dust cup with water dripping feature, coming out of the box and fill the water container section with water. Then place the dust cup on your vacuum cleaner. You can adjust the liquid density of the mop process by changing the amount of liquid with the water dripping adjustment button on the remote control.

WARNING
Do not put any liquid other than water (surface cleaner, bleach, etc.) into the container. Otherwise, your appliance may be damaged. Remove the cloth from your appliance and clean it after each sweeping process. Wet/damp cloths left on your device may cause malodor spread after a while.

CLEANING AND MAINTENANCE

Cleaning the Side Cleaning Brushes

After each using, check if there is any foreign material such as hair or fluff that will prevent it from working on the sweeping brushes. You can wipe the brushes with a damp cloth or remove and clean them with warm water.

Cleaning the Sensors and Wheels

After each using, wipe the sensors and wheels on the underside of the vacuum cleaner with a dry cloth.

Cleaning the Turbo Brush

The turbo brush is designed for high cleaning performance on any floor thanks to its rotational movement After each cleaning, check if there is any foreign material such as hair or fluff that will prevent it from working on the turbo brush. Remove the brush by opening the protective cover of the brush. You can wipe the brush with a damp cloth or clean it with warm water.

WARNING
Never place the sweeping brush on your appliance before it is completely dry.

Cleaning the Dust Cup

A Standard Dust Cup

Press the button in the middle of the dust cup and pull it towards you. Lift the top cover up by holding the same button down and empty the dust cup.

NOTE
Empty the dust cup after each use. Remove the Hepa filter cover and clean it with the warm water.

You can clean the Hepa filter with the help of a brush.

WARNING
Never allow the Hepa filter come into contact with water. Never place the HEPA filter cover on your appliance before it is completely dry.

NOTE
The HEPA filter should be replaced every 6 months. You can use the replacement filter included in the box or apply to ARZUM Technical Services to obtain a new filter.

Dust Cup with Water Dripping Feature

Press the button in the middle of the dust cup and pull it towards you. Separate the water tank and the dust cup with the handle on the upper part of the dust cup. Open the top cover of the dust cup with the help of the latch on the side and empty the dust cup.

WARNING
Never allow the Hepa filter come into contact with water. Never place the HEPA filter cover on your appliance before it is completely dry.

Product Life 10 years

Technical Specifications

• Input: 24V 600mA
• Battery: Li-ion 14.8V 2.6Ah

HANDLING AND SHIPMENT

During handling and shipment, your appliance must be kept in original package in order to prevent damages to its parts. Keep at normal position during shipment. Do not drop the product when transporting and protect from impacts. After delivery of the product, failures and damages that may occur while transporting are not covered by warranty.

The product is in compliance with the EEE Directives WEEE
This product contains recyclable materials that compliance with the WEEE directives. Do not dispose this product as unsorted municipal waste. Please contact your local municipality for the nearest collection point.

Manufacturer
Guangdong BONA Robot Corporation Limited building A, B, C No.30 Haogang Avenue, Dagang Town, Nansha District, Guangzhou,511470 Guangdong, P.R. China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>