TESLA T618 instrument 10.25 Inch screen Instruction Manual

: June 12, 2024
: Tesla

Table of Contents

TESLA T618 instrument 10.25 Inch screen
Product Information
Product Usage Instructions
Product introduction
product performance characteristics
Function operation Application
Common troubleshooting guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TESLA T618 instrument 10.25 Inch screen

TESLA-T618-instrument-10.25-Inch-screen-product

Product Information

The T618 instrument is an integrated machine developed for instruments, compatible with the original vehicle information, Android system, CarPlay interconnection, Bluetooth, forward blind area, navigation, and instrument information display. It features a non-destructive installation mode and a perfect combination with the center control panel, resembling the style of the original large screen. The product operates on the open Android system and can be controlled using steering wheel keys or voice commands for safer operation while providing entertainment and personalized high-end features.

The product uses Android version 4G full network with an octa-core processor, DDR:2GB/4GB RAM, and ROM:32GB/64GB storage. It has a 10.25-inch HD screen with a resolution of 1920*720 IPS for a closer resemblance to the original big screen style. The T618 instrument supports various vehicle models and offers functions such as wireless CarPlay, Bluetooth, online music and video streaming, Autonavi real-time road condition map navigation, voice control, and original car information and code watch style display.

Product Usage Instructions

Before installation, ensure that the power is turned off to prevent any power disconnection errors from the original car. In case of abnormal start, please consult the 4S shop for assistance.
To control the product, use the keys on the steering wheel or make telephone calls using voice commands for simplified operation and enhanced driving safety.
The screen display has three modes: full screen, right split screen, and left split screen. You can select the desired mode in Vehicle Settings – Other – screen display mode, and restart the machine to apply the changes.
The steering wheel key operations are as follows:

```
*  **Left hand pulley:**
```
- Slide up and down to adjust the volume.
- Short press left to play the previous song.
- Short press right to play the next song.
- Right hand pulley:
- Slide up and down to move the cursor.
- Short press the left push button to go back.
- Short press the right push button for confirmation.
- Long press left to open/close the code table display.
- Long press the right push button for the voice wake-up button.

Please refer to the user manual for further details and instructions on specific features and settings of the T618 instrument.

T618 instrument instruction manual
Thank you very much for your purchase of our products.
In order to protect your rights and interests, please read the instructions carefully before using the products of our company, so that you can use the machine correctly and safely. After reading, please keep it properly for future reference.

safety warning label In order to ensure the safety of yourself, your car and others, please be sure to meet the following basic requirements:

Please read all relevant instructions carefully before using this device. If damage is caused by failure to follow these instructions, the warranty will not be covered.
In order to ensure driving safety and avoid violating traffic laws, please do not watch the program or operate the machine while driving.
To avoid short circuit, do not allow the device to come into contact with rainwater. Do not place any metal objects (such as coins or metal tools) in the equipment. Please use the machine according to this manual. Do not open the machine for maintenance. If you need maintenance, please contact professional technicians.

Note: Remember to power off before installation, otherwise the original car will disconnect the power due to the error of detection, and the abnormal start will be dealt with in the 4S shop

Product introduction

Developed for instrument, this product is an integrated machine compatible with the original vehicle information, Android system, CarPlay interconnection, Bluetooth, forward blind area, navigation, instrument information display, etc. The structure adopts the non-destructive installation mode of private car mold, and the perfect combination with the center control panel is closer to the style of the original large screen.
The operating system of the product is the open Android system, which can be controlled by the keys of the steering wheel or make telephone calls by voice to simplify the operation and avoid driving safety risks, so that you can travel safely while providing entertainment and personalized high-end products.。

product performance characteristics

This product uses Android version 4G full network, octa-core processor, DDR:2GB/4GB, ROM:32GB/64GB operating system: Android12.0 with high performance hardware to run more smoothly, built-in wireless CarPlay mobile Internet, Bluetooth, online music, online video, Autonavi real-time road condition map navigation, voice control, and add the original car information and code watch style display
The appearance adopts the private mode HD 10.25 inch large screen, customized UI interface, adopts the full fit process to avoid dust, HD resolution 1920*720 IPS full view screen is closer to the original big screen style.

support models

MJ	vehicle type	Configuration	Remarks
19-21	3	Full range of models	Intel Atom
2021	Y	Full range of models	Intel Atom
2022	3/Y	Full range of models	AMD Ryzen

Product parameters

serial

number

| hardware configuration| Access

Equipment

| Built in Functions| vehicle information
---|---|---|---|---
1| CPU| Octa-core(A752+A556)| ****

Forward looking camera

(Radar trigger)

5

| ****

LCD

6

main interface function is introduced

TESLA-T618-instrument-10.25-Inch-screen-product-1

Road Condition
Temperature
Speed
Gear Position
Battery Left in Odometer
Lamp information
Battery Level
Charging tips

The screen display has three modes (full screen. Right split screen. Left split screen), can be selected in “Vehicle Settings” – “Other” – “screen display mode”, restart the machine after saving the effect.

TESLA-T618-instrument-10.25-Inch-screen-product-2

Steering wheel key operation instructions

Left hand pulley| ****

| Right hand pulley| ****

---|---|---|---
Slide up and down for volume

adjustment

| Slide up and down to move the

cursor

Short press left to push the

previous song

| Short press the left push button to

return

Short press right to push for the

next song

| Short press the right push button to

return the confirmation

| Long press left to open/close the

code table display

| Long press the right push button for

the voice wake up button

＊Note: When the control function is turned off by the button of cruise control or automatic driving, the button of left push right push is to adjust the following distance with the car in front *

Function operation Application

Language Setting
car machine into the interface point “vehicle Settings” – “general” – “language choice” supported languages are as follows: Chinese, English, traditional Chinese,Russian, Korean, French,Spanish, Portuguese, Polish, Dutch TESLA-T618-instrument-10.25-Inch-screen-product-5

Timing

to set the date and time synchronization network (effective) connect the WIFI
to set the date and time synchronization navigation (GPS) effectively
is adjustable for 12 hours, when the default system 24 hours a day
time can be automatic/manual Settings

version information view
vehicle Settings – general – version information

APP software upgrades

First turn the U disk into FAT32 format
Copy the upgrade package to the root directory of the USB flash drive, as shown in Figure 1 below!
After inserting the USB flash drive into the USB port on the right side of the instrument, the screen will prompt Firmware upgrade – Click Install (check “Clear all memory data” and some navigation data will be lost after formatting). Wait for the machine upgrade for about 3 minutes, the green interface will jump to the English interface after the upgrade is successful, remove the USB flash drive, as shown below!

instrument panel with the original car bluetooth connection

Search the original car Bluetooth and find the Bluetooth “BT1036V2.5.2-….” of the instrument machine. Connect by name
connection voice will send output through the simulation host
When the instrument machine plays sound/video sound can be output through the original car large screen horn
★（If not connected with the original car can only navigation sound, instrument built-in small speaker）

WiFi Connection Manager

Start by turning on your phone’s hotspot
car machine interface point “vehicle Settings” – “network” search WIFI hotspot connection to connect
shortcut to enter, slipping over the screen long press “WIFI” icon to enter the connection
note to check the WIFI signal strength

Scott map function

connected wi-fi hotspots or inserted after 4 g card can be real-time navigation
open navigation application enter the destination into the navigation or voice navigation
navigation to adjust the size of the voice
Tap the Sound icon in the upper right corner of the navigation map. A sound will be displayed Size progress bar, adjust the size of the sound progress bar can adjust the size of the sound
close map built-in input method

Click the “Head” icon in the upper left corner of the map interface to enter Settings – Other – built-in input can be closed

main interface switching three UI
steering wheel roller press roller long press left key 3 seconds to switch on the right
right click through the steering wheel on the right side of the wheel to choose corresponding UI

main interface way right border to replace custom images

click right border in can change via USB or change the images in the machine
According to return after choose to like the picture right border refresh automatically to the main interface
main interface right border quickly switch point under the two custom images with energy recovery
suggested the best effect is the square: 218 * 218
supported formats: JPG, PNG

PPTV

click application – video playback – choose the corresponding video files
play video can click on the picture in picture in the main interface display or drag the position main interface, click on the picture in picture to enlarge video double-click can return to the video player

Bluetooth connection

Enable the Bluetooth function of the mobile phone
in the machine interface “vehicle Settings” – “bluetooth” scan mobile devices
When the phone’s Bluetooth device name is scanned, click the device name to connect
phone receive pairing code prompts to confirm matching connection#

HD-FRONT

Go to “Vehicle Settings” – “Other” – “Forward view Settings”
visual function before open or close
when radar is triggered automatically into the top 10 seconds
When the front view camera is installed, the front view image can be opened. Without the front view, there is no need to open it.

factory settings

“vehicle Settings” – “factory Settings” – 6688 “password”
can enter the menu set at a lower level

navigation application

into “vehicle Settings” – “navigation”
path can be set up navigation application

choose music application
into “vehicle Settings” – “factory Settings” – “6688” – choose music application

boot LOGO Settings

the image resolution (1920 * 720/24).bmp file copy to U the packing list, and named bootlogo. BMP as shown in the figure below
U disk inserted into the screen on the USB port on the right point in turn: vehicle factory Settings – > set (6688) — – > LOGO boot choice – > sure wait for set up successfully
after the success of the set, remove the usb flash drive, machine electricity boot images can still be memory

Change WallPaper

wallpaper (resolution 1920 720/32) first PNG format file copy to U the packing list, and name into which wallpaper . PNG as shown in figure
U disk inserted into the screen on the USB port on the right point in turn: vehicle factory Settings – > set (6688) – > select wallpaper – > sure wait for set up successfully

models color selection

into “vehicle Settings” – “factory set up 6688” – “models color choice”
is selected automatically when synchronization original car models
manual can make models colour (silver/white/red/blue/black)

to install the APP

into the “application” – “document management” – “USB” – find U disk inside needed to install the apk – point Settings – allows
applications from the source of open – points in the top right corner of the back – point – after installing or open

Mobile interconnection wireless connection CarPlay

First connect WIFI or insert 4G card to activate CayPlay
bluetooth function, open the IPhone into the machine scan bluetooth device name point connection, mobile phone received the bluetooth pairing request to choose matching (figure 1)
phone received bounced “allows synchronization” address book “and” personal collection “option allows (figure 2)
phone received bounced “use CarPlay on-board” choose to use CarPlay vehicle (figure 3), connected (figure 4), the connection is successful (figure 5)

Wired Android auto
Android auto requires a phone that supports Google services and is installed in the Google play store Install the following essential software:

After installing the above apps, click on Android Auto, and install the corresponding services and updates according to the prompts.

Android auto Correct operation steps for wired connection （Phones need to support Google services and have auto software installed）
Open zlink software –> 2. Insert Android phone to USB –> 3. The connection success screen is shown
●Android auto Correct steps for wireless connection （Phones need to support Google services and have auto software installed）
Android auto wireless connection：Connect the Android phone to the USB OTG interface of the car (only OTG port is supported, other usb ports are not supported), and the Android auto (mobile phone) interface will be displayed after successful connection TESLA-T618-instrument-10.25-Inch-screen-
product-17

Common troubleshooting guide

fault	Reason	solution

Can not open the pc

| The power supply fuse is burned out| Replace the fuse of the same model
Installation without power failure causes vehicle detection error| To 4S shop after sale brush firmware processing
Other factors cause the microprocessor to work abnormally| The restart key
Startup without image| Background data error| Press the RST reset button at the top of the screen to

restart the system

The navigation won’t go in| The navigation software is uninstalled or

deleted. Procedure

|

factory reset

Navigation information cannot be

updated

| WIFI is not connected.| Connect to WIFI to synchronize online maps
GPS does not locate| GPS antenna position interference| Rearrange the position to be fixed
The original car information is not

synchronized or not displayed

| The protocol of the power cable is

abnormal

| Put the adapter plug back in and out
No images in front view or no access| The forward view function is disabled| Vehicle Settings – Other – forward view function turned on