UGEARS 70089 3D DIY Wooden Puzzle Box User Manual
- June 15, 2024
- UGEARS
Table of Contents
Model «Antique Box»
70089 3D DIY Wooden Puzzle Box
Assemble Me. Fill Me Uphttps://ugearsmodels.com/antique-box.html
Assembly instructions
Mechanical models
Assembly instructions:
Remove model parts from the hanger board as illustrated below. Careful not to
break parts. If a part does not remove easily, carefully cut it out with a
knife. This model is intended for self-assembly without glue. If you have
difficulty installing the axles, try waxing them with a regular candle. All
moving parts can also be waxed during assembly to reduce friction when
operating the madel.
Warning!
Do not use a lighted candle!
Spare parts.
Symbols.
| Wax the part with a regular candle (rub with a candle).
---|---
| Pay attention. Check for correct orientation or positioning.
| Sand to remove burrs.
| Check the mechanism for smooth and correct movement. Operate the mechanism
to seat the parts in their positions.
| Check size.
This is not a structural component; it is a tool for measurement and assembly. https://youtu.be/cr5A8XShDYk https://youtu.be/X-UJvuG5OTM https://ugearsmodels.com/qr/antique-box.html?utm_source=scan&utm_medium =antique-box&utm_campaign=qr
Thanks for following along on this journey with us.
Customer support
customerservice@ugearsmodels.com
ugearsmodels.com