Vorago HPB-401-LED Wireless Headphones User Guide

Vorago HPB-401-LED Wireless Headphones

KNOW YOUR SPEAKER

BUTTON OPERATION

• Power on: Press and hold button 2 sec when the device is off ( the red and blue light will flash, you will hear voice promote “power on and pairing,” at the same time), enter to the pairing mode freely.
• Play/pause: Press button to pause when it is playing, then press again to play.
• Volumen up: Click  button
• Volumen down: Click  button.
• Previous track: Long press button.
• Next track: Long press button.
• Answer incoming call: Press button 2 sec.
• Hang up the phone: Click  button.
• Reject incoming call: Pres button 2 sec.
• Light ON / OFF: Double click  button.
• Power off: Press and hold  button 2 seconds when headset is stanby or working mode. ( voice prompt “power off”.)
• Charging: Connect the charger to the USB type-C charging port, the indicator light will turn red, the light will turn off after fully charged.
• Music / game mode switch: Double click button.

MICRO SD CARD MODE

It would into TF mode once insert TF card, then identify music automatically.

WIRED AUDIO

Connect the aux cable to the device. The headset power off and enter aux mode.

CONNECTION BT

1. Press and hold the button  for 2 seconds until the headphone powers on and enter pairing mode automatically after 5s. The LED indicator flashes blue and red alternately. ( Headphones power o after 5 min if no bluetooth connected).
2. Activate bluetooth on your device and set it to search for new devices.
3. Select “HPB-401-LED” If necessary, enter four zeros (0000) for a passcode and accept the connection. Once successfully paired, the headphones LED indicator flashes blue. Wired connection: Use the audio cable to connect.

CHARGE

Please plug USB type-C into the headphone charging port and connect the other side with USB wall charging, and turns blue when fully charged.

DATA SHEET

Limited product warranty

Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warranty the buyer the absence of anomalies regarding the materials.

12 Months
LCD Monitor

• Except in panel (screen display) for which it will only be 12 months.

| 36 Months*
Computer equipment 3 years including Nanobay 3.

• Except computer equipment where the processor is integrated on the motherboard it will only be 12 months.

| 36 Months *

Important warranty policy: Please read and complete this warranty policy and seal it in the store when purchasing the product.

Product: Headphones BT|
---|---
Model: HPB-401-LED| Dealer stamp
Brand: Vorago
Serial number:
Invoice number:
Delivery date:

Responsibilities

The total responsibility of Vorago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the point of sale, presenting this warranty policy properly completed and stamped by the establishment where it was purchased. The product or copy of the receipt or receipt or invoice, in which data of the product and the date of purchase is specified, to verify the times within the warranty. Vorago may use new parts, restored or used in good condition to repair or replace any product, at no additional cost to the consumer. In the case of equipment and / or accessories that can not be repaired, the change will be generated by a similar product or with superior characteristics. This warranty covers the transportation expenses of the product derived from its fulfillment; which will be directly attributable to the supplier of the product. In all replacement products, the original warranty period will be renewed. Vorago is governed by international standards for the manufacture of products.

How to obtain warranty support
Warranty claims are processed through the point of sale, during the first 15 days after the purchase, as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustín, CP 45645, Tlajomulco de Zúñiga, Jalisco, Mexico. Except in situations of force majeure or fortuitous events, the repair time in no case will be greater than 30 calendar days from the date of receive of the equipment in Vorago.

Exclusions
This warranty is as valid in the following cases:

• When the product had been used in conditions other than normal.
• When the product has not been operated in accordance with the instructions for use.
• When the product has been altered or repaired by unauthorized persons by Vorago.

Vorago does not offer any other express warranty for this product. To make the warranty valid, as well as the acquisition of parts, components, consumables, and accessories To validate a warranty, the following information must be sent to the email: garantias@voragolive.com

1. Model and color
2. Product failure
3. Ticket or purchase invoice (digitized)
4. Your address with CP, telephone and full Name.

Available in the establishment where the product was purchased and/or in our central offices:

Returns
In the case of product return, it will only be the place of purchase by the end customer. Subject to the return policies established by the same seller.

• Vorago, S.A. de C.V.
• Francisco Villa No. 3
• Col. San Agustín, C.P. 45645
• Tlajomulco de Zúniga,
• Jalisco, México.
• Tel. (33) 3044 6666
• Importadora Global Rida S.A. de C.V.
• Matilde Márquez No. 68
• Colonia Peñón de los Baños C.P. 15520
• Alcaldía Venustiano Carranza, CDMX
• RFC: IGR1510164C2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>