Wunderlich SPRITZSCHUTZ 44790-XXX Dirt Trap Instruction Manual
- June 12, 2024
- Wunderlich
Table of Contents
Wunderlich SPRITZSCHUTZ 44790-XXX Dirt Trap
Specialist and expert knowledge is indispensable to carry out the assembly, special tools may also be required. If in doubt, the installation should be carried out by a specialist workshop.
Key
-
Fitting tip
-
Attention
-
Magnification
-
Fitting lubricant
-
Screw
-
Thread locking fluid
-
Torque
-
Cleaner
Component
| 1 | Lens head screw __ M5x10 | 7381A2 | 7381 | 2 |
|---|---|---|---|---|
| 2 | Washer plastic __ M5 | 9021PA | 7093 | 2 |
| 3 | double-sided tape | 12cm | ||
| 4 | dirt trap | 1 | ||
| 5 | bracket left & right side | 2 | ||
| 6 | cylinder head screw __ M10x90 | 912Z | 4762 | 4 |
| 7 | Washer M | 125Z | 7089 | 8 |
| 8 | Sleeve DØ 19,6 – dØ 10,8 – l 25,0 mm | 4 |
INSTRUCTION
Clean and degrease the inside of the fender before mounting the dirt trap.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>