VAXCEL W0423 Barrington 2 Light Black and Chrome Industrial Bathroom Vanity Fixture Instruction Manual

VAXCEL W0423 Barrington 2 Light Black and Chrome Industrial Bathroom

Vanity Fixture

Product Information

This product is a fixture that requires assembly and installation. It is designed to be mounted on an outlet box and can accommodate a maximum 60W medium base bulb (not included). The fixture includes a mounting plate unit (A), mounting screws (B), wire connector (C), and bolt nuts (D). The backplate of the fixture is attached to the mounting plate unit using the fixture mounting screws and bolt nuts.

It is important to follow the provided instructions and consult local electrical codes for wiring and grounding requirements before installation. The fixture also includes a grounding screw for proper electrical safety.

Product Usage Instructions

1. Turn off the power at the fuse or circuit box.
2. Unscrew the two bolt nuts (D) and remove the mounting plate unit (A) from the backplate.
3. Attach the mounting plate unit (A) to the outlet box using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary. Ensure that the two fixture mounting screws are horizontally aligned to make the fixture level.
4. Attach the backplate of the fixture to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws into set holes on the backplate. Secure them with two bolt nuts (D).
5. Install 2 x 60W Max. medium base bulbs (not included). Check the relamping label at the socket area or packaging for the maximum wattage allowed.
6. Turn on the power at the fuse or circuit box.

If any parts are damaged or missing, they can be re-ordered using the spare parts list:

• Assembly Kit 6586MM
• Mounting Plate Unit (A)
• Mounting Screw (B)
• Wire Connector (C)
• Bolt Nut (D)

WARNING:
TO APOWER WHILE INSVOID RISK OF ELECTRICATALLING OR SEL R SHOCK, BE SURE VICING THIS FIXTURE.TO SHUT OFF

NOTE:

1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package included

Installation Steps

Turn off the power at fuse or circuit box.

1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate.

2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary.
   Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level.

3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

   • Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
   • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
   • Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with green ground screw, then depending on local code, connect it to the house ground wire with the wire connector (C).
   • Carefully put all of the wires back into the outlet box.

4. Attach the backplate of the fixture to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws into set holes on backplate, then secure them with two bolt nuts (D).

5. Install 2 x 60W Max. medium base bulbs (not included). Check relamping label at socket area or packaging for maximum wattage allowed.

Turn on the power at the fuse or circuit box.

The following parts are available for re-order if damaged or missing.

Spare Parts List

Dimension

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>