NEMO Titia Minor Pendant Light Instruction Manual
- June 12, 2024
- NEMO
Table of Contents
NEMO Titia Minor Pendant Light
Product Information
Product Name: TITIA TITIA MINOR
Product Code: 072TIT000110
Designer: Arihiro Miyake
Assembly Instructions:
Product Usage Instructions
- Place the components on a table.
- Place close D+E+F components, paying attention to the orientation.
- Connect A+B+C components.
- Place D+E+F components close to A-B-C elements, paying attention to the orientation.
- Connect D-E-F components.
- Tassels and screws are not included.
- Adjust cable length.
- Cut the cable.
- Peel the cable.
- Combine arrows and numbers indicated on the cover and base.
- Click the components together.
- Follow the electrical connection instructions for 110V or 230V.
- Peel the cable again.
- Combine arrows and numbers indicated on the cover and base.
- Click the components together.
Warnings
- The lamp’s symbol descriptions and warranty information can be found in the attached sheet.
- Before any intervention, disconnect power to the device. Indoor use only.
- Use only the specified type and power of light bulbs indicated on the label data.
- Installation should be done by a qualified electrician.
- Anodized finishes may have different color shades, which are inherent to the galvanic finishing process and should be considered as aesthetic elements of the product.
- Brushing for polishing is done manually, so color shades are typical of the manual polishing process.
- Products made through extrusion deformation processes may have variations in dimensions.
- Handcrafted products may have variable thicknesses, colors, and finishes.
- Avoid exposing the product to environments with chlorine, saltwater, or other aggressive agents.
- The color temperature (CCT) of light sources may vary from the nominal declared value.
- The manufacturer reserves the right to make any technical or formal modifications without prior notice, especially concerning LED light sources.
- These instructions should be carefully preserved for future reference.
Box contents
Installation
ELECTRICAL CONNECTION
CAUTION
Symbols and guarantees of the fixture are described in the enclosed sheet. /
Disconnect power before proceeding with the installation of the fixture. / In
the absence of the IP symbol, the fixture is only for indoor installation. /
Use only bulbs of suitable type and power specified in the label. / Safety is
guaranteed only if installation is carried out by a qualified electrician.
/Products with anodized finishes could show different color shades due to the
industrial galvanic process. Shades have to be considered as aesthetic
elements of the product. /Polishing process is hand-made. Shades are therefore
due to this manual process. / Dimensions of products made with deformations of
extrusions could be subject to changes of ±1cm. / As blown glass is produced
by traditional craft techniques, its thickness, color, and finish are subject
to variations,a feature that makes each piece unique. /Do not install fixtures
in ambiances with the presence of chlorine, salt air, or aggressive agents, if
not expressly mentioned. / The color temperature (CCT) of LED sources can be
different from the declared nominal value between a range of ±5%. /NEMO
reserves the right to make any technical or formal alterations to its products
without giving prior notice, especially for LED sources. /We recommend you to
keep instructions for further consultations. /
This lamp has been manufactured in conformity with EU Directive 2002/96/EC. The crossed-out wheelie bin symbol marked on the appliance means that it was put on the market after 13th August 2005 and that it must therefore be disposed of separately from household waste. Separate disposal of this product prevents any negative effects to public health and the environment deriving from unsuitable disposal and allows the materials it is made of to be recovered to achieve considerable savings of power and resources. The end user is responsible for delivering the appliance, at the end of its working life, to a suitable collection facility. Failure to do so will be punished according to the current national legislation. For detailed information on collection systems and methods, please contact the relative office in your town, the local waste disposal service or the shop where you purchased the product.
Lamping
TITIA: LED, 90W, 3850lm, 110-240V, 2700K , 50/60Hz, dimmable 1-10V
This product contains a light source of an energy class “E”
INSTRUCTIONS FOR LAMP CLEANING
To clean the lamp, use only a soft cloth, moistened with soap and water, if
necessary.
NEMO Srl
Viale Brianza, 30 – 20823 Lentate sul Seveso (MB) ITALY Tel +39 0362 166 05 00
– Fax +39 0362 372 996 info@nemolighting.com –
nemolighting.com
Copyright © 2022 NEMO Srl Milano, Italia.
The text and images are protected by copyright. Unauthorized reproduction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>