CRYSTORAMA BYR-80101-MK Byron Matte Black 5 Inch Outdoor Lighting Sconce Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA BYR-80101-MK Byron Matte Black 5 Inch Outdoor Lighting Sconce
Product Information
The product is a lighting fixture with the model number
ASSEMBLY INSTRUCTION
WARNING
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 1- Medium Base Bulb 60 Watts Recommended 100 Watts Max. USE LED BULBS FOR EXTENDED USE THE FIXTURE IS WET RATED
How to install
- Insert the glass panel into the channel on the bottom of cage and secure it with the clip.Note:Please don’t bend the clip to secure the glass until all the glass panels are placed inside the cage.
- install the bulb(not included) into the socket.
- install the cage onto the top cap and secure with the cap nut.
- Place the fixture over the post and secure with screws.
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
- Dimensions : W4 1/4 x H6 1/2 x E3/4
Part Numbers
- (1) Mounting hardware
- (4) Screws
- (4) Glass panels – Size: 4 1/2 x 9 3/8 x 1/8
- (1) Light cluster
- (1) Bulb (Not included)
- (3) Cap Nuts
- (1) Backplate – Size: W4 1/4 x H6 1/2 x E3/4
Electrical Danger: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- The product is wet rated.
- The product may contain lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
To install the lighting fixture, follow these steps:
- Turn off the power before installation.
- Hire a licensed electrician to install all electrical components in compliance with the National Electric Code and local electrical codes.
- Gather the following items:
- 1 Medium Base Bulb (60 Watts recommended, 100 Watts max)
- Mounting hardware
- Screws
- Glass panels
- Light cluster
- Bulb
- Cap Nuts
- Backplate
- Attach the mounting hardware using the provided screws.
- Install the glass panels securely.
- Connect the light cluster to the electrical wiring according to the instructions provided by the licensed electrician.
- Insert the bulb into the socket (bulb not included).
- Tighten the cap nuts to secure the assembly.
- Attach the backplate to complete the installation.
Note: For extended use, it is recommended to use LED bulbs.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>