Lubemate L-AWP1015 Air Water Retractable Hose Reel Instruction Manual
- June 13, 2024
- Lubemate
Table of Contents
l-awp1015_inst_issue1
INSTRUCTION MANUAL
AIR / WATER RETRACTABLE HOSE REEL
Model L-AWP1015
DESCRIPTION
Thank you for purchasing a Cubemate hose reel. Each reel is a quality UV Stabilised reel, supplied complete with a delivery hose, feeder hose and mounting bracket.
FEATURES AND BENIFITS
- The hose reel is UV stabilised.
- The reel is easy to use positive latch and a built in hose layering mechanism to prevent hose bunching.
- Durable construction, made from high quality impact resistant polypropylene, light in weight and more compact.
- A powerful spring winds the hose back into the drum.
CAUTION
GENERAL SAFETY
Please read these operating instructions carefully and note the information given. Use these operating instructions to familiarize yourself with the product, the proper use and the safety instructions.
- To prevent injury or damage do not let go of the hose during rewinding.
- Hold the hose stop ball when retracting hose.
- Do not disassemble hose reel.
- Ensure the reel or hose is not in contact with any sharp objects or exposed to high temperatures.
- Do not drop this reel or damage will occur.
- Do Not use this product with any chemicals or liquid other than water.
- Turn off air/water supply after use or at the end of the day.
Installation
-
Take out the unit and accessories from the box ，
-
Choose a suitable place near source of air/water.
-
Take the mounting bracket as a template to mark the position for screws and drill four holes on the wall( Fig.2)
1| Hose reel| 1
---|---|---
2| Mounting bracket| 1
3| Self-tapping bolts| 4 -
Fix the bracket by four self-taping screws accordingly, (Fig.1)
-
Connect the reel to the mounting bracket.
Note:
- The reel should be installed horizontally to a wall or post.
- It is recommended to mount the reel approximately 1 meter above the ground.
Operation
- Connect feeder hose and turn on supply
- Pull out hose to desired length and stop.
Retract hose
- Always hold hose when retracting back into reel
- Turn off the air/water supply.
Storage
Cleaning
This Reel is maintenance-free and must not be cleaned internally with
water.
Maintenance
When not in use, turn off supply, and release the line pressure
The reel must not be used to transmit any chemical and substance
When not in use for an extended period of time it is recommended to be stored
in a cool dry place.
| Item | Description | Material | no off |
|---|---|---|---|
| 29 | Synchronous belt | PU | 1 |
| 28 | Right Cover | PP | 1 |
| 27 | Lead hose | Hybrid | 1 |
| 26 | Small Spring | Spring Steel | 1 |
| 25 | Inlet | Brass | 1 |
| 24 | Right Casing | PP | 1 |
| 23 | Tooth Wheel | PA | 1 |
| 22 | Slow return mechanism | PA6+GF30 | 1 |
| 21 | O‐Ring | NBR | 2 |
| 20 | Outlet | Aluminium | 1 |
| 19 | Lock System | PA | 1 |
| 18 | Fix Piece | PP | 1 |
| 17 | Sleeve | ABS | 1 |
| 16 | Inner Hexagon Screw | Q235 | 1 |
| 15 | Drum | PP+GF30 | 1 |
| 14 | Mounting Bracket | PP+GF30 | 1 |
| 13 | Spring | Spring Steel | 1 |
| 12 | Mounting Pin | PA66+GF30 | 1 |
| 11 | Lock Plate | PP+GF30 | 1 |
| 10 | Hose guide system | PA+POM | 1 |
| 9 | Hose Stop | PP | 1 |
| 8 | Pre‐loading Cap | PA6+GF30 | 1 |
| 7 | Output Hose | Hybrid | 1 |
| 6 | Handle | PP | 1 |
| 5 | Pre‐loading Wheel | PA66+GF30 | 1 |
| 4 | Guide Pole | Stainless Steel | 1 |
| 3 | Lock Piece | POM | 1 |
| 2 | Left Casing | PP | 1 |
| 1 | Left Cover | PP | 1 |
EXPLODED DIAGRAM
Note: no spare parts
available
TROUBLESHOOTING
| FAULT | DESCRIPTION | SOLUTION |
|---|---|---|
| The hose does not retract | Hose has been pulled out too far and locked | Access |
the drum through the window and carefully rotate the drum half a turn in the
direction of the hose being pulled out to release latch.
| Not enough spring tension| Add 1-2 turns extra turns:
1. Remove the small cover,
2. Use spanner to clamp the groove of preload wheel,
3. Unscrew four bolts on the wheel, then rotate it for 1-2 turns in
counterclockwise, then fasten the bolts, and replace the cover.Fig.4
SPECIFICATIONS – L-AWP1015
| Maximum Pressure | 300psi/20bar |
|---|---|
| Maximum Temperature | + 55 deg C |
| Hose type | Hybrid Polymer |
| Hose Size and Length | 3/8″ (10mm) x 15m (50ft) |
| Inlet / Outlet | 1/4″ BSPT (M) |
| Dimensions | 42.5 x 20.4 x 39.5cm |
| Weight | 5.5kg |
For warranty terms and condones refer to
www.macnaught.com.au
macnaught.com
Documents / Resources
|
Lubemate L-AWP1015 Air Water Retractable Hose
Reel
[pdf] Instruction Manual
L-AWP1015 Air Water Retractable Hose Reel, L-AWP1015, Air Water Retractable
Hose Reel, Retractable Hose Reel, Hose Reel
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>