NEUTRIK NL2FXX-W Loudspeaker Cable Connector Instruction Manual

June 12, 2024
NEUTRIK

NEUTRIK NL2FXX-W Loudspeaker Cable Connector

IMPORTANT SAFETY INFORMATION

  • ATTENTION: speak IS NOT TO BE USED AS AN AC MAINS OR POWER SUPPLY CONNECTOR! ON®
  • CONNECTOR NOT TO BE ENGAGED AND DISENGAGED IN NORMAL USED WHEN LIVE AUCTION: OR UNDER LOAD.
  • ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT
  • PRODUCT IS INTENDED FOR FACTORY ASSEMBLY ONLY

ASSEMBLY INFORMATION

NEUTRIK-NL2FXX-W-Loudspeaker-Cable-Connector-FIG-2

  • Place the bushing (1) and chuck (2) over the cable.

Important: Chuck and Bushing cannot be placed over the cable after the assembly or the insert.

Prepare the cable as shown

  • CABLE PREPARATION: 2 POLE
  • CABLE PREPARATION: 4 POLE

NEUTRIK-NL2FXX-W-Loudspeaker-Cable-Connector-FIG-3

Slide the cable into the contacts and clamp

NEUTRIK-NL2FXX-W-Loudspeaker-Cable-Connector-FIG-5NEUTRIK-NL2FXX-W-Loudspeaker-Cable-Connector-FIG-6

  • Position chuck (1) on insert (2).
  • Slide insert (2) with chuck (1) together into housing (3)
  • Important: Align the chuck by positioning the nose into the keyway.

Slide bushing (4) over chuck (1).NEUTRIK-NL2FXX-W-Loudspeaker-Cable-
Connector-FIG-7

  • Hold the connector with the NEUTRIK tool (5) and tighten bushing with the NEUTRIK tool (6) as shown.
  • For an exact mounting position use a torque wrench with 27 mm (1 1/8 inch) hex bit (7) and tighten it with 2.5 Nm (22 inch pound / 1.8 lb-ft).

FINISHED CONNECTOR

NEUTRIK-NL2FXX-W-Loudspeaker-Cable-Connector-FIG-9

DISASSEMBLY INFORMATION

FOR DISASSEMBLY!

  1. Use the Neutrik tool HTLACB.
  2. Position the tool on the surfaces and open the clamping sleeve.

SAFETY INFORMATION

CAUTION
To ensure protection category, do not expose the connection to bending forces (e.g. do not attach loads to the cable, no free dangling cable windings etc.).

SAFETYWARNING
For safety and certification reasons the connector must be replaced in case of any broken parts or excessive wear and tear.

More Information on the www.neutrik.com

Draft. Nr.: BDA 638 V2 Update: 2022-08-11I

  • Data subject to change without prior notice. © 2022 NEUTRIK. NEUTRIK®®are registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
  • www.neutrik.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals