BOCCI Round 21.36 Thirty Six 21 Pendants Hung Instruction Manual

: June 4, 2024
: BOCCI

Table of Contents

BOCCI Round 21.36 Thirty Six 21 Pendants Hung
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOCCI Round 21.36 Thirty Six 21 Pendants Hung

BOCCI-Round-21-36-Thirty-Six-21-Pendants-Hung-PRODUCT-
IMAGE BOCCI-Round-21-36-Thirty-
Six-21-Pendants-Hung-01

PENDANTS: thirty-six
MOUNTING: white powder coated round canopy 755mm (29.7”) in diameter x 53mm (2”) deep
LAMPING: 1.5w LED or 20w xenon
COAX: non-adjustable lengths. 3000mm (10’) standard / up to 30500mm (100’) maximum
MATERIALS: porcelain, borosilicate glass, braided metal coaxial cable, electrical components, white powder coated canopy
WEIGHT: approximately 28kg (61.7lb)
POWER SUPPLIES integral

DESCRIPTION
21.36 is a random conﬁguration of thirty-six 21 pendants hung from a round canopy. The drop lengths of the pendants are randomized between a client speciﬁed range of heights to variously cluster and scatter. The result is an ambient installation or ﬁeld of light. Inspired by the sporadic, discordant arrangement of barnacles on a rock surface, the 21 is fabricated from thin sheets of porcelain wrapped around a trumpet shaped borosilicate diffuser. Each diffuser houses a low voltage lamp. A strong contrast is established between the organically distributed soft light passing through the white porcelain skin and the sharp, crisp light passing through the borosilicate glass diffuser.

NOTES

Purchase replacement lamps online at www.bocci.com/shop/bulbs
Unless otherwise noted when ordering, all chandeliers will be outﬁtted to be xenon compatible.
As an alternative to built-in power supplies, Bocca recommends mounting power supplies remotely in an easily accessible and hidden location for ease of long-term maintenance.

US patent # US D556,361 Worldwide patents issued and pending. Made in Vancouver, Canada

Note: All connections and power supplies are tested by our technicians before shipping. However, it is possible for ports/power supplies to come loose or damage during shipping.
Test each port before installing canopy to ceiling to catch any loose connections or faulty power supplies. Measure and mark the light ﬁxture canopy position on the ceiling
Note: The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate. Connections from the plywood to the structural substrate are the client’s responsibility. Measure the plywood so that it ﬁts within the canopy side walls (refer to detail above). Anchor the plywood backing to the structural ceiling substrate. The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate.
Connections from the plywood to the structural substrate are the client’s responsibility. Measure the plywood so that it ﬁts within the canopy side walls (refer to detail above).
Anchor the plywood backing to the structural ceiling substrate.
Connect power supplies to line voltage. Xenon (110V) or LED: connect the black wire to black and white wire to white wire. Xenon (230V): connect black wire to brown wire and white wire to blue wire. For the ground connection, connect the green wire with yellow stripe to the bare copper wire or green wire in the junction box.
Note: Bocca strongly recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certiﬁed personnel to ensure compliance with the code.
Anchor canopy into the plywood backing using the fasteners provided. Turn power to ﬁxture on. Very carefully uncoil the braided coaxial cable in a spool like manner. Insert your index ﬁngers into opposite sides of the roll then rotate your ﬁngers around each other to unroll the coaxial cable. Use patience: allow the cable to uncoil completely to avoid kinks.
Bocca LED or xenon lamps are included. Lamping is power supply specie c. Plug the lamp into the socket. Do not touch the lamp with your bare hands. Ensure power to lamp is working correctly. Thread the coaxial cable through the shade, followed by the borosilicate diffuser, the cap, and ﬁnally close off the diffuser with the diffuser gasket.
Each pendant terminates in a “headphone jack” type connector, which plugs into a receiving receptacle in the canopy. Clients are encouraged to compose their own pendant conﬁguration on site, thus creating a truly unique ﬁxture. After plugging in each pendant, turn the threaded sheath into place by hand ensuring that it is adequately tightened. Tools are not required. Check that each lamp is working properly as you go along by keeping power to the ﬁxture on and lamps plugged in.
Clean fingerprints from surfaces For additional assistance, please contact Bocca: VANCOUVER sales@bocci.com www.bocci.com BERLIN europe@bocci.com
www.bocci.com US patent # US D556,361 Worldwide patents issued and pending. Made in Vancouver, Canada