NEMO Miniflux Linea Wall Indoor linear Instruction Manual
- June 12, 2024
- NEMO
Table of Contents
NEMO Miniflux Linea Wall Indoor linear
Box contents
Installation
Dare tensione all’impianto solo dopo aver collegato tutti i LED all’alimentatore/ Connect the fitting to the power supply only after connecting all LED to the driver
- Unscrew the screw at the end of the driver
- Draw the fixing points
- Make the holes for the dowels in the correct position
- Fix the driver to the barcket
- Cover the cable with the supplied protective sheath and make the connection with the driver
- Insert the Miniflux inside the Bracket, screw it to the cap and connect the fast connector to the dimmer
- Insert the grub in the cap
- Insert the cover
- Thightens the lower cap
Example of connection
CAUTION: INDOOR LUMINAIRE Installation should be carried out by a
suitable qualified installer. / Disconnect main voltage before maintenace
operation / All wiring and maintenance must be performed with the main switch
in the OFF position / Don’t open the luminaire. Connect the fitting to the
power supply only after connecting all LED to the driver (when expected) / In
case of failure, upon a return authorization of NEMO Studio, the product will
be not either open nor dismounted / Make the wiring using a system that
guarantees at least the IP grade of the spot. / Se previsto, use only bulbs of
suitable type and power specified in the label / Do not install fixture in
environment with presence of chlorine, salt air or aggressive agents, if not
expressly mentioned. / The color temperature (CCT) of LED sources can be
different from the declared nominal value within a range of ±5%. / NEMO
reserves the right to make any technical or formal alterations to its products
without giving prior notice, especially for LED sources. / We recommend you
keep instructions for further consultations.
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU. In
accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment),
luminaires must not be disposed of with other household waste. At the end of
their life, luminaires must be taken to the appropriate local facility
available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIONS
- Periodically clean the surface of the spot. Before starting, switch the light o. For Plastic parts – Glass – Painted parts:
- Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
- Clean with a soft and moist cloth with circular movements.
- Avoid using aggressive detergents. Use only neutral products (PH 7).
Note: for plastic parts use only antistatic alcohol-free soap. For
aluminum parts, clean them with a soft cloth.
This product contains a light source of energy efficiency class 
- Ilti Luce Srl
- Strada Borgata Paradiso 20 – 10036
- Settimo Torinese (TO) ITALY
- Tel +39 011 7657301
- [email protected].
- nemolighting.com.
Copyright © 2020 NEMO Srl Milano, Italia. The text and images are protected by copyright. Unauthorized reproduction. Versione 1.0 Data ultimo aggiornamento 19/04/2023 12W max IP40 35˚C 2700K 230V 3000K