SERVER SE-SS Rectangular Single Stand Instruction Manual
- June 12, 2024
- SERVER
Table of Contents
— Server Express®
Used with pouches up to **1% gallons with 16mm fitments.
MODELS: SE
SE-SS
SS-1SE
S$S-2SE
SE-2
SE-3
SE-3DI
SE-4
SE-4DI
SE-5
SE-5DI
**
SE-SS Rectangular Single Stand
Thank You for purchasing our Server Express® Pouched Condiment Dispenser.
This portion controlled unit is sealed and sanitary, achieves excellent
evacuation and has only a few parts for easy clean-up.
SIMPLIFY CONDIMENT MANAGEME GO POUCHED
SERVER EXPRESS” MODELS
Your model may vary. See pages 2—4.
Examples include:
SS-1SE
67760
Rectangular Single Stand
SE
07000
Rectangular Black
$S-2SE
07300
Twin Stand
PARTS
SERVER EXPRESS” MODEL
SE
07010
Round Black
PARTS
SERVER EXPRESS” MODELS
SE-SS
07125
Single|
---|---
SE-2
07140
Twin|
SE-3
07040
Triple|
SE-4
07200
Quadruple|
SE-5
07060
Quintuple|
SE-SS
07020
Single Drop-In|
SE-3DI
07050
Triple Drop-in|
SE-3DI
07210 Quadruple Drop-In|
SE-5DI
07070
Quintuple Drop-In|
PARTS
| MODEL(S) | LID | LID ASSEMBLY |
|---|---|---|
| 712,507,020 | 07055 | 07057 |
| 7140 | 07341 | 07342 |
| 704,007,050 | 07079 | 07083 |
| 720,007,210 | 07185 | 07186 |
| 706,007,070 | 07104 | 07105 |
For Express Singles, an 07159 may be substituted with a2 100280 vessel. These parts are interchangable and function the same.
| MODEL | REPLACEMENT SHROUD |
|---|---|
| 07125 | 7345 |
| 07020 | 7327 |
| 07020 | 7343 |
| 07140 | 7328 |
| 07050 | 7329 |
| 07200 | 7331 |
| 07210 | 7332 |
| 07060 | 7333 |
| 07070 | 7334 |
SAFETY
According to food and safety regulations, most foods must be stored and/or
served at certain temperatures or they could become hazardous.
Check with local food and safety regulators for specific guidelines. Server
Products, Inc. cannot be responsible for the serving of potentially hazardous
product.
IMPORTANT
Clean, rinse, sanitize, and dry parts daily or regularly to comply with local
sanitization requirements.
NSF
International lists this pump as: “Not acceptable for dispensing potentially
hazardous foods.”
DROP-IN UNITS
Drop-in units can be used either on a countertop surface or can be dropped into an opening in a countertop.
| MODEL NUMBER | RECOMMENDED COUNTERTOP OPENING SIZE |
|---|---|
| 07000, 07020 | 63/8″x81/2″ |
| 7010 | 81/2″ diameter |
| 7,050 | 163/8’x81/2″ |
| 7,210 | 2113/16″x81/2″ |
| 7,070 | 273/16’x81/2″ |
PUMP MODEL 07794
PUMP ASSEMBLY
WASH ALL PARTS
PROPERLY BEFORE USE. see page 11
SETUP
PORTION CONTROL
TAKE-DOWN & DISASSEMBLY
CLEANING
-
CLEAN
After disassembling, clean all washable parts with soap and hot water. -
RINSE
fully with clear water. -
SANITIZE
all parts according to local sanitization requirements. All parts in contact with food must be sanitized. -
AIR DRY
all parts fully.
YES!
Use dishwashing soap and hot water
- External surfaces may be wiped clean with a clean damp cloth.
- Glass and surface cleaners approved for use in food contact areas may be used.
- Do not use abrasive, caustic or ammonia based cleansers.
- Do not use metal scrapers or cleaning pads that could scratch surfaces.
CARE OF STAINLESS STEEL
This unit is constructed with stainless steel— one of the best materials for
food serving and storage.
If you notice corrosion beginning on any stainless steel surface, you may need
to change the cleansing agent, sanitizing agent, or the cleaning procedures
you are using.
- Amildly abrasive nylon or brass brush may be used to remove any stubborn food or mineral deposits on interior surfaces of unit.
- Fully rinsing and drying all parts can help prevent corrosion. Elements and minerals in tap water can accumulate on stainless steel parts and create corrosion.
- Do ot use products containing acids, alkalines, chlorine, or salt. These agents can corrode stainless steel.
TROUBLESHOOTING
DIFFICULT TO ATTACH PARTS?
- Wet parts with clean water to help fit.
PRODUCT DOESN’T PUMP?
- Ensure pinch valve is inserted in housing.
- Ensure connector is snapped fully in place to fitment in pouch.
- Ensure pump is properly attached to pouch.
- Clean pump thoroughly.
- Ensure pump s properly installed into retaining slots inside front wall of shroud.
DOME POPS OFF?
- Clean thoroughly. Food residue could prevent atight seal between dome and housing.
- Ensure dome edges are flush with housing.
Server Products Inc.
3601 Pleasant Hill Road
Richfield, Wl 53076 USA
Chat wite us!
[email protected]
262.628.5600
| 800.558.8722Please be prepared with your Model, P/N and Series located on
the lid or base of the unit.
Manual #EM_01534-Revs 110822
Documents / Resources
|
SERVER SE-SS Rectangular Single
Stand
[pdf] Instruction Manual
SE-SS, SE-SS Rectangular Single Stand, Rectangular Single Stand, Single Stand,
Stand
---|---