NATIONAL INSTRUMENTS NI-9753 Differential Digital I-O Module User Guide
- June 12, 2024
- NATIONAL INSTRUMENTS
Table of Contents
NATIONAL INSTRUMENTS NI-9753 Differential Digital I-O Module
COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily
accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every Ni series. We
work out the best solution to suit your individual needs.
- Sell For Cash
- Get Credit
- Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.
Bridging the gap between the manufacturer and your legacy test system.
All trademarks, brands, and brand names are the property of their respective owners.
Manufacturer: National Instruments
| Part Number and Revision | Description |
|---|---|
| 153629B-02L or later | NI 9753, DIFFERENTIAL DIGITAL I/O MODULE |
Volatile Memory
Target Data
| ****
Type
| ****
Size
| Battery Backup| User 1 Accessible| System
Accessible| Sanitization Procedure
---|---|---|---|---|---|---
Device operation| CPLD| INTEL| No| No| Yes| None
Non-Volatile Memory (incl. Media Storage)
Target Data
| ****
Type
| ****
Size
| Battery Backup| User Accessible| System Accessible|
Sanitization Procedure
---|---|---|---|---|---|---
Device configuration
· Device information
| Flash| 8 MB| No| ****
No
| ****
Yes
| ****
None
Board Assembly Part Numbers (Refer to Procedure 1 for identification procedure):
Non-Volatile Memory (incl. Media Storage)
- Refer to the Terms and Definitions section for clarification of User and System Accessible
Notice: This document is subject to change without notice.
- For the most recent version, visitni.com/manuals.
- Contact: 866-275-6964 support@ni.com
Procedures
Procedure 1 – Board Assembly Part Number identification:
To determine the Board Assembly Part Number and Revision, To determine the
Board Assembly Part Number and Revision, refer to the label on the back of
your product. The Assembly Part Number should be formatted as P/N:
x-##L, where X is the revision letter.
Terms and Definitions
Cycle Power:
The process of completely removing power from the device and its components
and allowing for adequate discharge. This process includes a complete shutdown
of the PC and/or chassis containing the device; a reboot is not sufficient for
the completion of this process.
Volatile Memory:
Requires power to maintain the stored information. When power is removed from
this memory, its contents are lost. This type of memory typically contains
application-specific data such as capture waveforms.
Non-Volatile Memory:
Power is not required to maintain the stored information. Device retains its
contents when power is removed. This type of memory typically contains
information necessary to boot, configure, or calibrate the product or may
include device power-up states.
User Accessible:
The component is read and/or write addressable such that a user can store
arbitrary information to the component from the host using a publicly
distributed NI tool, such as a Driver API, the System Configuration API, or
MAX.
System Accessible:
The component is read and/or write addressable from the host without the need
to physically alter the product.
Clearing:
Per NIST Special Publication 800-88 Revision 1, “clearing” is a logical
technique to sanitize data in all User Accessible storage locations for
protection against simple non-invasive data recovery techniques using the same
interface available to the user; typically applied through the standard read
and write commands to the storage device.
Sanitization:
Per NIST Special Publication 800-88 Revision 1, “sanitization” is a process to
render access to “Target Data” on the media infeasible for a given level of
effort. In this document, clearing is the degree of sanitization described.
- November 2019 378209A-01 Rev 001
Notice: This document is subject to change without notice. For the most recent version, visit ni.com/manuals.
Contact: 866-275-6964 support@ni.com
References
- Product Documentation - NI
- NI-9753 National Instruments Differential Digital I/O Module | Apex Waves
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>