EETHING YR350A012A003 Indoor String Downlights User Manual
- June 16, 2024
- EETHING
Table of Contents
EETHING YR350A012A003 Indoor String Downlights
What’s in the Box?
Specifications
At a Glance
Installation Steps
- Wipe the surface and make sure the surface is clean and dry.
- Tear off one of the sides of the 3m tape and apply it it to the side or top of the light(Note: Wall Mounted needs to be applied to the side, and ceiling mounted needs to be applied to the top.)
- Tear off the 3M tape on the back of the light.
- Press the light firmly against the surface for more than 15 seconds. (Ceiling Mounted Suggestion: Install the string lights 1.9-3.9 inches away from the wall surface).
- Use cable clips to organize cables. Use screws to secure the cable clamps in place.
- Connect the power and enjoy the string downlight.
Pairing Your Device with the Smart Life App
What You Need
- A WI-FI router that supports 2.4GHz and 802.11 b/g/n bands(5GHz not supported)
- A smartphone or tablet running IOS or Android.
Pairing Instructions
- download the “Smart Life” App from the App Store (iOS) or Google Play(Android). Create and log in with your account.
- Turn on the Bluetooth and Location on your smartphone.
- Open the Smart Life App, tap the “+” icon in the top right corner and search for “indoor wall light”
- Tap the device icon and follow the on-screen instructions to complete the pairing.
Controlling the Device with Your Voice
- Open the app, then tap the “me” icon in the bottom right corner to enter the details page.
- Select the Alexa or Google Assistant user guide and follow the on-screen instructions to control the device using your voice.
Troubleshooting
- cannot connect to the Smart Life App
- Check if the light is powered on.
- Check if your smartphone’s Bluetooth and location are enabled, or try connecting with another smartphone.
Wi-Fi disconnected or failed to connect
- Check if the light is powered on.
- Ensure your Wi-Fi router is 2.4GHz capable (5G is not supported)
- Ensure you entered the correct Wi-Fi password during the Wi-Fi connection process.
- Try connecting the light with a smartphone hotspot to check if your home network is working properly.
- Shorten the distance between the light and the Wi-Fi router to less than 20ft, then try reconnecting.
- Check that the control box and power adaptor are all properly connected.
- If you have any questions about the device or if something is missing or damaged in the package, feel free to contact our support team with your order number.
Warranty
36-Month Limited Warranty
Support: Lifetime
Technical Support Email: xuelanmu1121@126.com
Read and follow all the safety instructions
- This product is not waterproof. Avoid exposing its components to splashes, water drops, or high-humidity environments.
- The working temperature should be between 14°F to 104 °F(-10°C to 40°C).
- The internal light sources of this product cannot be replaced.
- If the light sources sustain damage, the product should be replaced.
- Do not allow children to assemble and install this product without adult supervision.
- Avoid installing this product near major heat sources.
- External dimmers cannot be used with this product.
- Avoid installing this product near potentially dangerous sources(e.g. candles,liquid-filled objects.)
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used under the instructions may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator your body. Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>