BRONCO BFT2100 Front Bumper Frame Tie In Brackets Installation Guide
- June 13, 2024
- BRONCO
Table of Contents
BRONCO 2021
FRONT BUMPER FRAME TIE
IN BRACKETS
BFT2100 Front Bumper Frame Tie In Brackets
VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST
Start by removing the “U” shaped nut bracket located behind the frame face plate. This bracket was orginally used to mount your bumper and is replaced by the individual M12 nuts and washers provided.Repeat this procedure on both sides of both frame rails. Be sure to clean the areas and paint any raw metal to prevent rusting. Position the Frame Tie in Brackets as shown, making sure they are flush up agaisnt the back of the frame face plate. Tighten both mounting bolts on each Frame Tie in Bracket and then procede with your bumper installation.
ITEM NO. | PART NUMBER | DESCRIPTION | QTY. |
---|---|---|---|
1 | 2BFT2021-01 | INNER FRAME TIE IN BRACKET – PS | 1 |
2 | 2BFT2021-02 | OUTER FRAME TIE IN BRACKET – PS | 1 |
3 | 2BFT2021-03 | INNER FRAME TIE IN BRACKET – DS | 1 |
4 | 2BFT2021-04 | OUTER FRAMAE TIE IN BRACKET – DS | 1 |
5 | HB12175M40ZPCL88 | HEX BOLT M12-1.75 x 40mm ZINC PLATE CL8.8 | 8 |
6 | HN12175MZPCL8 | HEX NUT M12 X 1.75mm ZINC PLATE CL8 | 14 |
7 | FW5022ZP | FLAT WASHER Ø1/2″ X 1.375″ ZINC PLATE | 22 |
NOTES:
- BFT2100 = BARE STEEL OPTION
- BFT2101 = BLACK POWDER COAT
- WEIGHT = APPROX 6.25 LBS
UNLESS OTHERWISE SPECIFIED: | NAME | DATE |
---|
DIMENSIONS ARE IN INCHES
TOLERANCES: ±0.010
ANGULAR: MACH ±1º
TWO PLACE DECIMAL ±0.015
THREE PLACE DECIMAL ±0.005| DRAWN| MCH| 12/21/2021
CHECKED| |
ENG APPR.| |
MFG APPR.| |
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LOD LLC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LOD LLC
IS PROHIBITED.| MATERIAL:
N/A
FINISH:
SEE NOTES
ECO:
–
LOD LLC.
DESCRIPTION:
2021 BRONCO FRONT FRAME TIE IN BRACKETS
DWG. NO.
BFT2100
BFT2101
REV A
SHEET 1 OF 1
SHEET SIZE: B
SCALE: 1:2.5
BFT2100 – Rev 1
12/27/21
Documents / Resources
|
BRONCO BFT2100 Front Bumper Frame Tie In
Brackets
[pdf] Installation Guide
BFT2100 Front Bumper Frame Tie In Brackets, BFT2100, Front Bumper Frame Tie In
Brackets, Bumper Frame Tie In Brackets, Frame Tie In Brackets, Tie In
Brackets, In Brackets
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>