NATIONAL INSTRUMENTS PXI-2585 Multiplexer Switch Module User Guide
- June 12, 2024
- NATIONAL INSTRUMENTS
Table of Contents
NATIONAL INSTRUMENTS PXI-2585 Multiplexer Switch Module
Manufacturer: National Instruments
Board Assembly Part Numbers (Refer to Procedure 1 for identification procedure):
| Part Number and Revision | Description |
|---|---|
| 191821A-01 or later | PXI-2585 |
| 191822A-01-01L or later | PXI-2586 |
Volatile Memory
Target Data
| ****
Type
| ****
Size
| Battery Backup| User 1 Accessible| System
Accessible| Sanitization Procedure
---|---|---|---|---|---|---
Relay scanlists| SRAM| 128 KB| No| Yes| Yes| Cycle Power
Relay counts, states| FPGA
Block RAM
| 150 KB| No| Yes| Yes| Cycle Power
Non-Volatile Memory (incl. Media Storage)
Procedures
Procedure 1 –Board Assembly Part Number Identification:
To determine the Board Assembly Part Number and Revision, refer to the label
applied to the surface of your product. The Assembly Part Number should be
formatted as “P/N: ######A-##L
Terms and Definitions
-
Cycle Power:
The process of completely removing power from the device and its components and allowing for adequate discharge. This process includes a complete shutdown of the PC and/or chassis containing the device; a reboot is not sufficient for the completion of this process. -
Volatile Memory:
Requires power to maintain the stored information. When power is removed from this memory, its contents are lost. This type of memory typically contains application-specific data such as capture waveforms. -
Non-Volatile Memory:
Power is not required to maintain the stored information. The device retains its contents when power is removed. This type of memory typically contains the information necessary to boot, configure, or calibrate the product or may include device power-up states. -
User Accessible:
The component is read and/or write addressable such that a user can store arbitrary information about the component from the host using a publicly distributed NI tool, such as a Driver API, the System Configuration API, or MAX. -
System Accessible:
The component is read and/or written addressable from the host without the need to physically alter the product. -
Clearing:
Per NIST Special Publication 800-88 Revision 1, “clearing” is a logical technique to sanitize data in all User Accessible storage locations for protection against simple non-invasive data recovery techniques using the same interface available to the user; typically applied through the standard read and write commands to the storage device. -
Sanitization:
Per NIST Special Publication 800-88 Revision 1, “sanitization” is a process to render access to “Target Data” on the media infeasible for a given level of effort. In this document, clearing is the degree of sanitization described.
March 2017: 376545B-01 Rev 002
Notice: This document is subject to change without notice. For the most
recent version, visit ni.com/manuals.
Contact: 866-275-6964
support@ni.com.
COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily
accessible documentation and free downloadable resources .
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every NI series.
We work out the best solution to suit your individual needs.
- Sell For Cash
- Get Credit
- Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.
Bridging the gap between the manufacturer and your legacy test system.
Request a Quote~ CLICK HERE (PXI-2585 National Instruments Multiplexer Switch Module | Apex Waves) PXI -2585
All trademarks, brands, and brand names are the property of their respective owners. Refer to Terms and Definitions section for clarification of User and System Accessible
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>