NEMO Miniflux Linea Indoor Linear Pendant Light Instruction Manual
- June 12, 2024
- NEMO
Table of Contents
NEMO Miniflux Line Indoor Linear Pendant Light
Box contents
Dimensions
Installation
Warning
- Connect the fitting to the power supply only after connecting all LED to the driver
- Installation should be carried out by a suitable qualified installer.
- Make the holes for the dowels in the correct position (center distance 1045mm)
- Unscrew the end caps and insert the suspension cables.
- Fix the lamp with wall dowels (not included) and the little roses. Adjust the suspension cable using the ceiling adjustment
Example of connection (parallel connection)
CAUTION
INDOOR LUMINAIRE
- Installation should be carried out by a suitable qualified installer.
- Disconnect main voltage before maintenance operation
- All wiring and maintenance must be performed with the main switch in the OFF position
- Don’t open the luminaire.
- Connect the fitting to the power supply only after connecting all LED to the driver (when expected)
- In case of failure, upon a return authorization of NEMO Studio, the product will be not neither open or dismounted
- Make the wiring using a system that guarantees at least the IP grade of the spot.
- Se previsto, use only bulbs of suitable type and power specified in the label
- Do not install fixture in environment with presence of chlorine, salt air or aggressive agents, if not expressly mentioned.
- The color temperature (CCT) of LED sources can be different from the declared nominal value within a range of ±5%. NEMO reserves the right to make any technical or formal alterations to its products without giving prior notice, especially for LED sources.
- We recommend you to keep instructions for further consultations.
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU. In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIOS
Periodically clean the surface of the spot. Before starting, switch the light
off.
For Plastic parts – Glass -Painted parts:
- Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
- Clean with a soft and moist cloth with circular movements.
- Avoid using aggressive detergents. Use only neutral products (PH 7).
Note: for plastic parts use only antistatic alcohol-free soap. For aluminum parts, clean with a soft cloth.
Lamping
- This luminaire contains built-in LED lamps.
- The LED cannot be changed in the luminaire from the end-user. Please contact NEMO STUDIO (only authorized center).
- This product contains a light source of energy efficiency class
Contact
lti Luce Srl – Strada Borgata Paradiso 20 – 10036 Settimo Torinese (TO) ITALY
Tel: +39 011 7657301
nemostudio@nemolighting.com
– nemolighting.com
NEMO Studio
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright. Unauthorized reproduction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>