CHAUVET DJ ML6 RFC Remote Control Instructions
- June 12, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ ML6 RFC Remote Control Instructions
RFC Remote Control
The RFC can be operated with any Chauvet RF enabled fixture.
RF wireless control must be set on the fixture.
To enable RF wireless control in the fixture, locate the RF function in the
Menu Map and enable RF.
Binding
To bind the fixture to the remote, navigate to the BIND option in the
fixture’s menu and follow instructions.
| Once the remote has bound to the fixture, it is possible to select a group
on the fixture.
Assigning the fixture to a group will be important when using the remote, as
the remote can command multiple groups at once.
---|---
Battery Power
The RFC is battery operated. Ensure that the Alkaline battery (A23) is
installed prior to operating the remote.
| Movement may cause the back lights to turn on and drain the battery while
being transported.
Turn off the unit when not in use.
---|---
Operation
| RFC | Button | Function |
|---|---|---|
| < BLACK OUT> | Press to turn off all lights until the button is pressed |
again
< STROBE>| Press to toggle strobe, then use < B> or < -> to
increase or decrease strobe speed
< DIMMER>| Press then use < +> or < -> to increase or decrease
the dimmer
The RFC remote will not respond to any inputs when Freeze or Black Out is
activated.
If the remote does not respond when a button is pressed, try pressing <
Freeze> or < Black Out> Freeze or Black Out may have been inadvertently
activated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>