GIRA 5001 Pushbutton Sensor 4 Komfort 1 Gang Instruction Manual

GIRA 5001 Pushbutton Sensor 4 Komfort 1 Gang

Specifications

• Product Name: Pushbutton Sensor 4 Komfort
• Available Variants: 1-gang (Order no. 5001), 2-gang (Order no. 5002), 4-gang (Order no. 5004)

Product Information

Safety Instructions

Electrical devices must be installed and connected by electrically skilled individuals to prevent injuries, fires, or property damage. Follow all regulations and standards for SELV circuits during installation.

Device Components

Front View:

• (a) Operating rockers
• (b) Status LED
• (c) Additional button – Functional for KNX system from hardware version I01 onwards

Rear View:

• (d) Connection for remote sensor
• (e) Locking screws
• (f) Opening for removing the device connection terminal with a screwdriver
• (g) Device connection terminal

System Information

The Pushbutton Sensor 4 Komfort is part of the Gira One Smart Home system, allowing control and automation of lighting, heating, shading, and more. It can be operated via switches, an app, or remotely by electrically skilled persons.

Product Characteristics

Operating Functions include room temperature control, LED display with modes like always OFF, always ON, actuation display, or status display.

Product Usage Instructions

Mounting and Electrical Connection

Follow the mounting instructions provided in the manual,v ensuring proper electrical connections by skilled individuals.

Commissioning

Commission the device using the Gira Project Assistant for the Gira One Smart Home system. Follow the steps outlined in the manual for a seamless setup process.

Operation

• Switch: Short press on the button to switch.
• Dimming: Long press on the button for dimming. Release the button to stop dimming.
• Move Shading: Long press on the button to move shading.
• Stop or Adjust Shading: Short press on the button to stop or adjust shading.

FAQ

Q: Can the Pushbutton Sensor 4 Komfort be used with other smart home systems?
A: The device is specifically designed for use with the Gira One Smart Home system and is recommended to be used within this ecosystem for optimal performance.

Safety instructions

• Electrical devices may be mounted and connected only by electrically skilled persons.
• Serious injuries, fire or property damage are possible. Please read and follow the manual fully.
• Danger of electric shock. During installation and cable routing, comply with the regulations and standards which apply for SELV circuits.
• This manual is an integral part of the product, and must remain with the customer.

Device components

Front view

• (a) Operating rockers

• (b) Status LED

• (c) Additional button

• 1…8 Buttons assignment and status LED
  The additional button (c) is functional from hardware version I01 onwards and is only intended for the KNX system.
  Rear view
  

• (d) Connection for remote sensor

• (e) Locking screws

• (f) Opening for removing the device connection terminal with a screwdriver
  

• (g) Device connection terminal

System information

• This device is a product for the Gira One Smart Home system. The Gira One system is commissioned easily and in a time-saving manner using the Gira Project Assistant.
• The Gira One Smart Home system enables the control and automation of lighting, heating and shading, as well as connection to various third-party systems and much more. It can be operated via Gira One switches, by app from home or securely from a remote location. Electrically skilled persons can maintain the Gira One project remotely free of charge.
• Data transmission between the Gira One devices is encrypted. This provides protection against third-party access and manipulation.
• Commissioning is carried out with the free Gira Project Assistant (GPA), version 5 or higher. Free function and security updates are also transferred to the Gira One devices with the GPA.
• The Gira One system is based on the globally proven KNX smart home standard.

Intended use

• Operation in Gira One system
• Operation of loads, e.g. lights, shading
• Mounting in appliance box with dimensions according to DIN 49073

Product characteristics

• Push-button sensor 4 comfort for operation of the Gira One system
• Integrated temperature sensor for measuring the room temperature
• Integrated air humidity sensor for measuring the ambient air humidity
• Input for external remote sensor for measuring the floor temperature
• Programming and commissioning with the Gira Project Assistant (GPA), version 5.1 or higher
• Encrypted data transmission between the Gira One devices

Operating functions

• Switching loads, such as light, socket or pump
• Dim the light
• Operation of shading and ventilation loads (Venetian blinds, shutters, roof windows, roof domes and awnings)
• Convenient group control of switching, dimming, shading and ventilation loads
• Recalling scene variants
• Operation as staircase switch for activation of staircase function with switching and dimming loads
• Function as floor call push-button together with the Gira G1
• Control of Sonos audio devices
• Control of hue loads
• Control of eNet loads
• Function as door or garage door opener
• Boost function

Room temperature

• Temperature calibration for the integrated temperature sensor

LED display

• The brightness of the status LED can be set to 5 levels and OFF
• The colour of the status LEDs (red, green, blue, yellow, cyan, orange, violet or white) can be set
• Function selection of the status LEDs can be set according to the rocker function: always OFF, always ON, actuation display or status display

Operation

• Switch: Short press on button.
• Dim: Long press on button. The dimming process ends when the button is released.
• Move shading: Long press on button.
• Stop or adjust shading: Short press on button

Information for electrically skilled persons

Mounting and electrical connection
DANGER!

• Electric shock when live parts are touched.
• Electric shocks can be fatal.
• Cover up live parts in the installation environment.

1. (a) Operating rockers
2. (e) Locking screws
3. (h) Supporting frame
4. (i) Programming button
5. (j) Push-button sensor
6. (k) Box screws

Mounting and connecting the device (see figure 3)

• The device should be used in an air-tight appliance box. Otherwise temperature and humidity reading can be negatively influenced by draughts.

  • Enter or scan the device certificate and add it to the project. A high resolution camera should be used to scan the QR code.
  • The device certificate should be removed from the device during mounting.
  • Document all passwords and keep them safe.
    Mount supporting frame (h) in the right orientation on an appliance box.
    Note the TOP marking.
    Use the enclosed box screws (k).

• Pull off commissioning rockers from push-button sensor.
  The push-button sensor is delivered with commissioning rockers. The operating rockers suitable for the push-button sensor must be ordered separately (see accessories).

• Connect bus line with device connection terminal observing the correct polarity (red = +, black = -).

• Optional: Connect remote sensor (see accessories) to connection (d). The relevant device connection terminal is included with the remote sensor.

• Attach push-button sensor (j) onto the supporting frame (h).

• Screw push-button sensor (j) with the integrated locking screws (e) onto supporting frame. Connection torque max. 0.8 Nm.

• Optional: Cover up the locking screws (e) with the labels supplied with the rocker set (only for the 2-gang and 4-gang device variants).
  Push-button sensor can be put into operation.

• Snap on operating rockers (a).
  Device is ready for operation.

Commissioning

• The device is commissioned with the Gira Project Assistant (GPA), version 5.1 or higher.
• All status LEDs are switched off during programming. As soon as the programming is successfully completed, the status LEDs carry out their parameterised function.
• When the program is discharged and the bus voltage is connected, all status LEDs initially light up white. Whenever a button is actuated, the respective illuminated status LED changes colour (white → red → green → blue → yellow → cyan → orange → violet → white → …).

Safe-state mode
The safe-state mode stops the execution of the program. Only the system software of the device is still functional. Diagnosis functions and programming of the device are possible.

Activating safe-state mode

• Switch off the voltage.
• Press and hold down the programming button.
• Switch on voltage.

The safe-state mode is activated. The programming LED flashes slowly (approx. 1 Hz).
Release the programming button only after the programming LED starts flashing.

Deactivating safe-state mode
Switch off the voltage or carry out programming.

Master reset
The master reset restores the basic device settings (firmware remains in place). The device must then be recommissioned with the GPA.

Performing a master reset
Precondition: The safe-state mode is activated.

• Press and hold down the programming button for > 5 seconds until the programming
  LED starts flashing quickly.

• Release the programming button.
  The device performs a master reset. The programming LED is switched on.
  The device restarts and is in delivery state.

Mounting the rockers

• Attach the rocker centrally.
• Press on the rocker with both thumbs (see figure 4).
  The rocker snaps into place.
  Device is ready for operation.

Removing commissioning rockers
Pull the commissioning rocker on both sides to release it from the push-button sensor (see figure 5).

Removing rockers
Pull the rocker on one side to release it from the push-button sensor (see figure 6).

Technical data

• Rated voltage DC 21 … 32 V SELV
• Current consumption, bus 8 … 18 mA
• Connection type for bus Device connection terminal
• Connecting cable, bus EIB-Y (St)Y 2x2x0.8
• Protection class III

Installation dimensions (see figure 7)

• Construction height 12.5 μm
• Installation depth 15.5 μm

Mechanism

• Loosening torque locking screws max. 0.8 Nm
• Connection cable remote sensor (see accessories)
• Cable type extension NYM-J 3×1.5 or J-Y(St)Y 2×2×0.8
• Total length remote sensor line Max. 50 m

Ambient conditions

• Ambient temperature -5 … +45°C
• Storage/transport temperature -20 … +70°C

Parameter list

Parameters that can be set via the GPA:

Status LED brightness| Off

Heavily dimmed Dimmed Normal

Bright

Very bright

---|---
The brightness of the status LEDs can be defined here.

In the case of the push-button sensor 2-gang or 4-gang, this setting applies to all LEDs.

The colour of the status LEDs can be defined here.

In the case of the push-button sensor 2-gang or 4-gang, the colour of the status LEDs can be defined separately for each rocker.

Function| always OFF always ON

Button-actuation display

Status indication

---|---
The function of the status LEDs can be defined here.

In the case of the push-button sensor 2-gang or 4-gang, the function of the status LEDs can be defined separately for each rocker.

The settings have the following functions:

–             always OFF

The status LED is always off

–             always ON

The status LED is always on.

–             Button-actuation display

The status LED lights up when the rocker is actuated.

–             Status indication

The status LED indicates the state of the function triggered by the rocker. If the feedback for several switch loads is displayed, the status LED is then switched on (if at least 1 load from the group is switched on).

The value for the temperature calibration can be entered here if the temperature measured by the temperature sensor in the push-button sensor or by the connected remote sensor differs from the actual room temperature.
Temperature calibration| – 12.8….. 12.7 K
---|---
To determine the temperature deviation, the actual room temperature should be de- tected with a reference measurement using a calibrated temperature measuring device.

The measured value must be raised if the value measured by the sensor is below the actual temperature. The measured value must be lowered if the value measured by the sensor is above the actual temperature.

Accessories

• Individually labeled rocker sets are available from the Gira inscription service www.beschriftung.gira.de.
• Rocker set, 1-gang for pushbutton sensor 4 Order no. 5021.
• Rocker set, 1-gang, inscribable, for pushbutton sensor 4 Order no. 5031.
• Rocker set, 2-gang for pushbutton sensor 4 Order no. 5022.
• Rocker set, 2-gang, inscribable, for pushbutton sensor 4 Order no. 5032.
• Rocker set, 4-gang for pushbutton sensor 4 Order no. 5024.
• Rocker set, 4-gang, inscribable, for pushbutton sensor 4 Order no. 5034.
• Remote sensor Order no. 1493 00

Warranty

The warranty is provided by the specialist trade by statutory requirements.
Please submit or send faulty devices postage paid together with a fault description to your responsible salesperson (specialist trade/installation company / electrical specialist trade). They will forward the devices to the Gira Service Center.

Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel +49(0)21 95 – 602-0
Fax +49(0)21 95 – 602-191
www.gira.de
info@gira.de

References

• Suche
• Suche
• Suche
• Suche
• Suche
• Suche
• Suche
• Gira Inscription Service
• Schalter, Steckdosen & smarte Technik | Gira

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>