Vorago BSP-300-V3 Bluetooth Speaker User Guide

Vorago BSP-300-V3 Bluetooth Speaker

Product Information

• Product Name: BT Speaker 300V3
• Features: Bluetooth and 3.5mm compatibility, USB Type C charging port, built-in rechargeable battery, music control buttons, call function buttons
• Specifications:
  • Input Voltage: 5V 500mA
  • Output Power: 4W (RMS)
  • Frequency Range: 180Hz-20KHz
  • Sensitivity: 80dB
  • Impedance: 4 ohms
  • Total Harmonic Distortion (THD): 1%
  • Speaker Size: 50mm
  • Range: > 10m
  • Bluetooth Version: 5.0
  • Battery Capacity: 3.7V 1500mAh
  • Weight: 210g
  • Dimensions: 87 x 83.5 x 45 mm

Product Usage Instructions

1. Charge Your Speaker
   • Please charge your speaker before using it
   • Plug the included Type-C cable into the charging port (4) on your speaker
   • Connect the other end of the cable to an available port on a computer or wall adapter.
2. Turn On Your Speaker
   • Press the power button (5) until you hear a tone and see the indicator LED light up.
3. Turn Off Your Speaker:
   • Press the power button (5) until you hear a tone and see the indicator LED turn off.
4. Bluetooth Connection:
   • Make sure you are within 10 meters of the speaker
   • To pair a device, press the power button (5) until you hear a tone and the indicator LED starts flashing blue
   • In the Bluetooth devices section of your device, select the BSP-300-V3 model from the list
   • Once connected, the indicator LED will change to a solid blue color
   • Note: The speaker can remember and store up to 8 paired devices. If any of these devices are not found, the speaker will enter pairing mode.
5. Music Control:
   • Play / Pause: Click the play/pause button.
   • Volume +: Click the volume + button.
   • Volume -: Click the volume – button.
   • Next song: Press and hold the next song button.
   • Previous song: Press and hold the previous song button.
   • BT / Auxiliary mode change: Click the BT/Auxiliary mode change button.
6. Call Function:
   • Answer call: Click the answer call button.
   • Reject call: Press and hold the reject call button.
   • End call: Click the end call button.
   • Redial number: Press and hold the redial number button.
7. Delete a Bluetooth Device:
   • Press the delete buttons ( , ) at the same time until you hear a tone and the LED light turns blue in intervals
   • This indicates that your speaker is ready to pair a new device.
8. Using the 3.5mm Auxiliary Port:
   • Turn on your speaker.
   • Use the included 3.5mm cable and plug it into the auxiliary port (3) on your speaker
   • Automatically, your speaker’s LED light will turn green.

KNOW YOUR SPEAKER

1. Volume + / Next song
2. Volume – / Previous song
3. Auxiliary port 3.5 mm
4. USB type C charging port
5. On and  button
6. Play / Pause / End call button

CHARGE YOUR SPEAKER

1. Please charge your speaker before using it.
2. Plug the included Type-C cable into the port on your speaker (3) into an available port on a computer or wall adapter.

Battery status (LED)
The speaker will beep every 30 seconds when the battery power is less than 10%. The battery LED will illuminate red when charging is required  When the LED doesn’t light and the speaker neither make any sound, it indicates that the speaker has no battery.
Note: When the battery drops below 3%, the speaker will turn automatically.

TURN ON YOUR SPEAKER

Press the button (5) until you hear a tone and you will see that the indicator LED lights up.

TURN OFF YOUR SPEAKER
Press the button (5) until you hear a tone and you will see that the indicator LED will turn.

BT CONNECTION
Make sure you are less than 10 meters away from the speaker. When the horn is, you must press the button (5) until you hear a tone and the indicator LED will begin to flash blue. Within your device to be linked in the BT devices section, look for the BSP-300-V3 model from the list and select it. Once linked, the indicator LED will change to a solid blue tone.

Note: When you press the power button, the speaker will remember the last paired device and can store up to 8 devices. If any of these 8 devices are not found, the speaker will go into pairing mode.

MUSIC CONTROL

• Play / Pause……………………… Click
• Volume +……………………………Click
• Volume – …………………………..Click
• Next song …………………………Press and hold
• Previous song ………………….Press and hold
• BT / Auxiliary mode change …..Click

CALL FUNCTION

• Answer call……………………… Click
• Reject call ……………………….. Press and hold ****
• End call…………………………….. Click
• Redial number…………………Press and hold

DELETE A BT DEVICE
Press the “ ”, “ ” buttons at the same time until you hear a tone and the LED light turns blue in intervals, this indicates that your speaker is ready to pair a new device.

USING THE 3.5 MM AUXILIARY PORT

Turn on your speaker
Use the included 3.5mm cable and plug it into your speaker’s 3.5mm port (3) automatically your speaker’s LED light will turn green.
Note: In 3.5 mm mode the music control buttons will not be available.

CAN’T CONNECT YOUR SPEAKER?
Check that your device supports A2DP and That your speaker is less than 10 m Your speaker is in pairing mode

DATA SHEET

Limited product warranty

Vorago equipment and/or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warranty the buyer the absence of anomalies regarding the materials

12 Months
LCD Monitor

• Except in panel (screen display) for which it will only be 12 months.

| 36 Months*
Computer equipment 3 years including Nanobay 3.

• Except computer equipment where the processor is integrated on the motherboard it will only be 12 months.

| 36 Months *

Important warranty policy: Please read and complete this warranty policy and seal it in the store when purchasing the product.

Product: BT speaker|
---|---
Model: BSP-300-V3| Dealer stamp
Brand: Vorago
Serial number:
Invoice number:
Delivery date:

Responsibilities

The total responsibility of Vorago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the point of sale, presenting this warranty policy properly completed and stamped by the establishment where it was purchased. The product or copy of the receipt or receipt or invoice, in which data of the product and the date of purchase is specified, to verify the times within the warranty. Vorago may use new parts, restored, or be used in good condition to repair or replace any product, at no additional cost to the consumer. In the case of equipment and/or accessories that can not be repaired, the change will be generated by a similar product or with superior characteristics. Thi warranty covers the transportation expenses of the product derived from its fulfillment; which will be directly attributable to the supplier of the product. In all replacement products, the original warranty period will be renewed. Vorago is governed by international standards for the manufacture of products.

How to obtain warranty support
Warranty claims are processed through the point of sale, during the first 15 days after the purchase, as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustín, CP 45645, Tlajomulco de Zúñiga, Jalisco, Mexico. Except in situations of force majeure or fortuitous events, the repair time in no case will be greater than 30 calendar days from the date of receiving the equipment in Vorago.

Exclusions
This warranty is as valid in the following cases:

• When the product had been used in conditions other than normal.
• When the product has not been operated in accordance with the instructions for use.
• When the product has been altered or repaired by unauthorized persons by Vorago.
• Vorago does not er any other express warranty for this product.
• To make the warranty valid, as well as the acquisition of parts, components, consumables, and accessories

To validate a warranty, the following information must be sent to the email: garantias@voragolive.com

1. Model and color
2. Product failure
3. Ticket or purchase invoice (digitized)
4. Your address with CP, telephone, and full Name.

Available in the establishment where the product was purchased and/or in our central es:

Returns
In the case of product return, it will only be the place of purchase by the end customer. Subject to the return policies established by the same seller Vorago, S.A. de C.V.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>