AVTechsmart miniRETROB100L Light User Manual
- June 12, 2024
- AVTECHSMART
Table of Contents
AVTechsmart miniRETROB100L Light
Product Information
The miniRETROB100L is a high temperature indoor lighting lamp. It features built-in programs, manual mode function, and sound control function. The lamp has a DMX mode with 1 channel and 6 channel options. It also has a pixel control feature for precise control over the lighting effects. The product dimensions are provided in the product dimension drawing.
Safety Instructions
- Do not touch the lamp body when working to avoid burns.
- Maintain a 50CM space at the back of the lamp body for heat dissipation.
- Turn off the lamp power when installing or replacing the lamp tube.
- This lamp is for indoor use only and is not waterproof.
- Ensure that the voltage and frequency of the power supply match the requirements of the device.
- Do not operate the equipment if there is wire damage or wear.
- Do not remove any part of the equipment during use.
- Any unauthorized modification to the product will void the warranty.
Function Menu
The function menu provides access to different working modes and functions
of the lamp.
Function Operation
Built-in Program Automatic Function
- Select the working mode menu.
- Select automatic mode.
- Choose one of the fifteen programs.
- Set the program speed.
Manual Mode Function
The manual mode function is consistent with the Pixel control 7CH channel. In
manual mode, DMX address is not working.
- Select the working mode menu.
- Select manual mode.
- Choose one of the seven functions corresponding to the sub-menus.
Sound Control Function
- Select the working mode menu.
- Select automatic mode.
- Choose one of the nine programs.
- Select the working mode menu again.
- Select sound control mode.
- Set the sound control sensitivity. Voice control does not work from 0 to 15, and becomes more sensitive from 16 to 255.
Channel Function
The lamp has DMX general functions with 1 channel and 6 channel modes.
1CH DMX General Function
- Select the working mode menu.
- Select DMX mode.
- Set to 1 channel mode.
- Exit the working mode menu, select the DMX menu, and set the DMX menu address. The DMX address can be set to 001.
6CH DMX General Function
- Select the working mode menu.
- Select DMX mode.
- Set to 6 channel mode.
- Exit the working mode menu, select the DMX menu, and set the DMX menu address. The DMX address can be set to 001.
Note: The channel functions specify different features and settings based on the range of values.
Safety Notes
Note : To ensure reasonable consistency of operation, please read this instruction carefully. Any damages caused by the non- observance of this manual or any unauthorized modification to this product are not be subject to warranty .
- This product belongs to high temperature products. Do not touch the lamp body when working, carefully scalds!
- Maintain a 50CM space at the back of the lamp body for dissipate heat.
- When installing/replacing the lamp tube, turn off the lamp power!
- This lamp is used for indoor lighting, not waterproof ! When lamp works, lamp tube at high temperature.
- Make sure the voltage and frequency of power supply match the power require of this devise.
- Please do not operate the equipment in the condition of wire damage or wear.
- Do not remove any part of the equipment during the use of lamps.
- Any unauthorized modification to this product are not be subject to warranty .
Function Menu Function Operation
Keys diagram
built-in program Automatic function
- Select the working mode menu.
- Select automatic mode.
- Choose one of fifteen programs.
- Setting program speed.
manual mode function
The manual mode function is consistent with the Pixel control 7CH channel but
in manual mode DMX address is not working in that condition . The seven sub-
menus correspond to seven functions .
Sound control function
- Select the working mode menu.
- Select automatic mode. Because sound control is based on the automatic program, so you need to choose the automatic program before you turn on the sound control .
- Choose one of nine programs .
- Select the working mode menu.
- Select sound control mode.
- Set the sound control sensitivity. 0-15 voice control does not work. From 16 to 255 sound control will more and more sensitive .
Channel Function
1CH DMX general function
- Select the working mode menu.
- Select DMX mode.
- Set to 1 channel mode.
- Exit the working mode menu, select the DMX menu, and set the DMX menu address.
The DMX address can be set to 001.
Channel | Function | From | To | Feature |
---|---|---|---|---|
1 | Dimmer | 0 | 000 | No function |
1 | 255 | Master dimmer |
6CH DMX general function
- Select the working mode menu.
- Select DMX mode.
- Set to 6 channel mode.
- Exit the working mode menu, select the DMX menu, and set the DMX menu address.
The DMX address can be set to 001.
Channel | Function | From | To | Feature |
---|---|---|---|---|
1 | Dimmer | 0 | 255 | Brightness 1—100% |
2
|
Strobe
| 0| 3| No function
4| 7| Dimmer
8| 76| Synchronizing strobe;
Strobe from slow to fast
77| 145| Pulse strobe ;
Strobe from slow to fast
146| 215| Random strobe ;
strobe from slow to fast
216| 255| Dimmer
3
|
Auto run-1
| 0| 15| No function
16| 31| Program 1
32| 47| Program 2
48| 63| Program3
64| 79| Program4
80| 95| Program5
96| 111| Program6
112| 127| Program7
128| 143| Program8
144| 159| Program9
160| 175| Program10
176| 191| Program11
192| 207| Program12
208| 223| Program13
224| 239| Program14
240| 255| Program15
4
|
Auto run-2
| 0| 15| No function
---|---|---|---|---
16| 31| Program 16
32| 47| Program 17
48| 63| Program18
64| 79| Program19
80| 95| Program20
96| 111| Program21
112| 127| Program22
128| 143| Program23
144| 159| Program24
160| 175| Program25
176| 191| Program26
192| 207| Program27
208| 223| Program28
224| 239| Program29
240| 255| Program30
5
|
Speed
| 0| 000| No function
1| 255| Program speed from slow to fast
6
|
Sound
| 0| 000| No function
1| 255| Sensitivity increases gradually
7CH DMX Pixel Control function
- Select the working mode menu.
- Select DMX mode.
- Set to 7 channel mode.
- Exit the working mode menu, select the DMX menu, and set the DMX menu address.
The DMX address can be set to 001
Channel | Function | From | To | Feature |
---|---|---|---|---|
1 | LED 1 | 0 | No function | |
1 | 255 | Brightness 1—100% | ||
2 | LED 2 | 0 | No function | |
1 | 255 | Brightness 1—100% | ||
3 | LED 3 | 0 | No function | |
1 | 255 | Brightness 1—100% | ||
4 | LED 4 | 0 | No function | |
1 | 255 | Brightness 1—100% | ||
5 | LED 5 | 0 | No function | |
1 | 255 | Brightness 1—100% | ||
6 | LED 6 | 0 | No function | |
1 | 255 | Brightness 1—100% |
7
|
LED 7
| 0| | No function
1| 255| Brightness 1—100%
8| Dimmer| 0| 255| Brightness 1—100%
9
|
Strobe
| 0| 3| No function
4| 7| Dimmer
8| 76| Synchronizing strobe;
Strobe from slow to fast
77| 145| Pulse strobe ;
Strobe from slow to fast
146| 215| Random strobe ;
strobe from slow to fast
216| 255| Dimmer
Product Dimension Drawing
As below :
Technical Parameter Diagram
Item | Technical Parameter |
---|---|
Work voltage | 110 ~ 230V50/60HZ |
Power consumption | 210W |
Light source | 7×30W LED |
DMX channel | 1CH/6CH /7CH/9CH |
Control Mode | Auto-run , Sound control ,DMX control |
Color temperature | 2200K |
Dimension | 456 x 520 x130mm |
Wight | 8.3KG |
Packing | Carton/1pcs , Flight case/4pcs |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>