AVTECHSMART SMARTPAR615 Battery Operated LED PAR 6x15W User Manual

AVTECHSMART SMARTPAR615 Battery Operated LED PAR 6x15W

6 IN 1 BATTERY & WIRELESS WATERPROOF PAR
Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First QCharge before use. Plug-in Power cord. Turn off the Power Switch and Turn off the other switch to charge.

Introduction

Unpacking: Thank you for purchasing this product, all products have been thoroughly tested and have been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit have arrived intact. In the case, the damage has been found or parts are missing, please contact the manufacturer or your dealer for further instructions. Do not return this unit to your dealer without first contacting them.
Introduction: This lighting is a DMX intelligent and battery-powered LED par light. This par light is lightweight and compact which makes it a great piece for mobile DJs and clubs.
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user- serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton whenever possible.

General Instructions

To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Features

• Power supply: AC110V-250V
• Frequency: 50-60Hz
• Power consumption: 90W
• Light source: 6pcs 15W high brightness 6 in 1 LEDs
• Lamp life: 6-10 ten thousand hrs
• LED angle: 25 degree
• Color: 16.7 million kinds of color change
• Control channels: 6/10 chs
• Control mode: DMX512, master/slave, auto, sound active
• Automatic model(by function button): color change, color strobe, color dimmer, color gradual change/color jump change
• Operation menu: LCD display
• Packing size: 230210230mm
• N.W: 3.5kg
• G.W: 4kg

Safety Precautions

• To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
• Do not spill water or other liquids into or onto your unit.
• Be sure that the local power outlet matches the required voltage for your unit.
• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal shortage.
• Disconnect from the main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user-serviceable parts inside.
• Never operate this unit when its cover is removed.
• Never plug this unit into a dimmer pack.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only; use of this product outdoors voids all warranties.
• During long periods of non-use, disconnect the unit‟ s main power.
• Always mount this unit in a safe and stable matter.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See “Cleaning” for details.
• Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
• A. The power-supply cord or the plug has been damaged.
• B. Objects have fallen, or liquid has been spilled into the appliance.
• C. The appliance has been exposed to rain or water.
• D. The appliance does not appear to operate normally or exhibit a marked change in performance.
• The fuse standard is 2A/250V
• Grounded using yellow/green line
• The ambient temperature must always be under +35° C

Set-Up

Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your light and is workable in 100-220V/50~60Hz. Because line voltage may vary from venue to venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate your fixture.

Operating Instructions

• Operating Modes: You can use this lighting in 5 ways:
• Sound activation – The unit will be activated by the sound signal.
• Static display – The unit will display the color in a static way.
• Auto Mode – The unit will automatically chase through the different patterns.
• DMX control mode – This function will allow you to control the lighting with a standard DMX512 controller.
• Battery powered – This function will allow you to control the lighting independently without any DMX cable
• DMX Mode: Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs. This function also allows you to use your fixtures as pattern-changing lights.

1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller.
2. this lighting uses 6/10 DMX channels to operate. Please see “DMX channel and Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard controller. Set your desired DMX address following the setup specifications that come with your DMX controller.
4. The unit can automatically recognize the DMX signal once the DMX connection is done.

DMX Linking
To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.

6CH Mode

CH1

| 0| No action
1-255| RED dimmer
CH2| 0| No action
1-255| GREEN dimmer
CH3| 0| No action
1-255| BLUE dimmer
CH4| 0| No action
1-255| WHITE dimmer
CH5| 0| No action
1-255| AMBER dimmer
CH6| 0| No action
1-255| UV dimmer

10CH Mode

CH1

| 0| No action
1-255| RGBAW+UV dimmer

CH2

| 0-4| No action
5-255| Strobe from slow to fast

CH3

| 0| No function
1-255| Red dimmer

CH4

| 0| No function
1-255| Green dimmer

CH5

| 0| No function
1-255| Blue dimmer

CH6

| 0| No function
1-255| White dimmer

CH7

| 0| No function
1-255| Amber dimmer

CH8

| 0| No function
1-255| UV dimmer

CH9

| 0-4| No function
5-80| Color macro
 | 81-150| Color jump
---|---|---
151-220| Color fade
221-255| Sound active

CH10

| 0| No function
1-255| Speed from slow to fast

LCD Operation Menu

For Battery Function and Charge

The unit has the function of battery powered. The button for battery and charge is set on the rear panel. It is shown as the following picture, and the function is described below.

Infrared function

Infrared Mode Infrared (IR) mode allows product 10 to be controlled via an Infrared remote controller. The IRC-6 can remotely sell the product to various modes; adjust the color, speed, and sensitivity, and sell the sb”obe. The Par is compatible IMlh lhe induced IRC-6. To enable us v.ilh lhe IRC-6, low the Instructions below:

1. Press repeatedly until SET show., on the display.
2. Press and On (rums on the infrared sensor) or OFF (rums off the Infrared sensor) shows on the display.
3. Press or lo select the desired option.
4. Press .

IRC-6 Operations Be sure the IRC-6 remove Is pointing directly at lhe product and there is nothing in between the remote and the product.

Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To tum on Automatic mode:

1. Press on the IRC-6.
2. Press <+> or<-> to choose between the four different auto programs.

To adjust the speed of the automatic program:

1. Press on the IRC-6.
2. Press<%>.
3. Press <·+> or<-> to either Increase or decrease the speed of the program.

Sound-Active Mode
Sound. The active mode will enable the product to respond to the music.
To tum on Sound-Active mode:
Press on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:

1. Press on the IRC-6.
2. Press<%>.
3. Press <+> or<-> to either increase or decrease sound sensitivity.

Manual Color Control
To choose a specific color v.ith the IRC-6:

1. Press on the IRC-6.
2. Press any number between and <9> to choose your color.

To manually control the RGB percentage:

1. Press on the IRC-6.

2. Press , , or (red, green, or blue) to choose your color.
   Note: The Freedom”‘ Par Tri-6 only contains red, green, and blue LEDs. The amber, White, and UV color options on the IRC-6 v.111 only operate v.ith ~xtures capable of outputting these color lights.

3. Press<+> or <-> to Increase or decrease the percentage of each color. Miscellaneous Operation