Zyxel GS-108A 8-port Desktop Gigabit Ethernet Switch User Guide

: June 12, 2024
: ZYXEL

Table of Contents

Zyxel GS-108A 8-port Desktop Gigabit Ethernet Switch
Copyright
Disclaimer
Trademarks
FCC Interference Statement
FCC Warning
ZyXEL Limited Warranty
Customer Support
- Contacting Customer Support
Getting to Know Your Switch
Hardware Installation
Hardware Connection
Product Specifications
FAQ’s
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Zyxel GS-108A 8-port Desktop Gigabit Ethernet Switch

Copyright

The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice.

Trademarks

Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. Interference Statements and Warnings

FCC Interference Statement

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operations.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CE Mark Warning

This is a class-A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Taiwanese BSMI (Bureau of Standards, Metrology, and Inspection) A Warning

Certifications

Refer to the product page at www.zyxel.com.

ZyXEL Limited Warranty

ZyXEL warrants to the original end-user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind of character to the purchaser.

To obtain the services of this warranty, contact ZyXEL’s Service Center for your Return Material Authorization number (RMA). Products must be returned to Postage Prepaid. It is recommended that the unit be insured when shipped. Any returned products without proof of purchase or those with an outdated warranty will be repaired or replaced (at the discretion of ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced products will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you may also have other rights that vary from country to country.

Customer Support

If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the following ways:

Contacting Customer Support

When you contact your customer support representative, have the following information ready:

Product model and serial number.
Warranty information.
The date you received your product.
Brief description of the problem and the steps you took to solve it.

METHOD LOCATION| E-MAIL: SUPPORT SALES| TELEPHONE FAX| WEB SITE FTP SITE| REGULAR MAIL
---|---|---|---|---
WORLDWIDE| support@zyxel.com.tw sales@zyxel.com.tw| +886-3-578-3942

+886-3-578-2439

| www.zyxel.com www.europe.zyxel.com ftp.europe.zyxel.com| ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 300, Taiwan
CZECH|

info@cz.zyxel.com

|

+420 241 091 350

621143 01 Praha 4 –

+45-3955-0707

| www.zyxel.dk ftp.zyxel.dk| ZyXEL Communications A/S, Columbusvej 5, 2860 Soeborg, Denmark
FINLAND|

support@zyxel.fi

|

+358-9-4780-8411

00700 Helsinki

+33(0)4 72 52 97

Bat. 1 / C

| | +33 (0)4 72 52 19

20

| | 69760 Limonest France
GERMANY| suppor t@zyxel.de

__sales@zyxel.de

| +49-2405-6909-0| www.zyxel.de| ZyXEL Deutschland GmbH.
---|---|---|---|---
| +49-2405-6909-99| | Adenauerstr. 20/A2 D-52146 Wuerselen, Germany
NORTH AMERICA| support@zyxel.com sales@zyxel.com| +1-800-255-4101| www.us.zyxel.com ftp.us.zyxel.com| ZyXEL Communications Inc., 1130 N. Miller St.

Anaheim, CA 92806, U.S.A.

NORWAY|

support@zyxel.no

|

+47 22 80 61 80

0667 Oslo

support@zyxel.es

|

+34 902 195 420

1º, 28043 Madrid

support@zyxel.se

|

+46 31 744 7700

support@zyxel.co.uk

|

+44 (0) 1344

|

www.zyxel.co.uk

|

ZyXEL Communications UK

Getting to Know Your Switch

Introduction

The switch is a multi-port switch that can be used to build high-performance switched networks. The switch is a store-and-forward device that offers low latency for high-speed networking. The switch is designed for SOHO (Small Office Home Office) businesses. Standalone Workgroup Application The switch can be used as a standalone switch to which computers, servers, and print servers are directly connected to form a small workgroup.

Standalone Workgroup Example

Hardware Installation

The switch is suitable for an office environment where it can be placed on a desktop.

Step 1. Make sure the switch is clean and dry.
Step 2. Set the switch on a smooth, level flat space strong enough to support the weight of the switch and the connected cables. Make sure there is a power outlet nearby.
Step 3. Use only the supplied power adaptor to connect your switch to a power source. Refer to the label on the power adapter for more information.

Do not block the ventilation holes

Hardware Connection

The power and the Ethernet ports are located on the rear panel.

Rear PanelGS-105A

Rear Panel: GS-108A

Power Connection

Connect one end of the supplied power adaptor to the power port on the rear panel of the switch and the other end to the appropriate power source. The PWR LED turns on.

RJ-45 Auto-negotiating Ports

The switch comes with 5 or 8 10/100/1000M RJ-45 ports depending on the model of your switch. The auto-negotiation feature allows the switch to detect the speed of incoming transmission and adjust appropriately without manual intervention. It allows data transfers of 10 Mbps, 100 Mbps, or 1000 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.

Auto-crossover Ethernet Ports

All ports are auto-crossover, that is auto-MDIX ports (Media Dependent Interface Crossover), so you may use either a straight-through Ethernet cable or a crossover Ethernet cable for all Ethernet port connections. Autocrossover ports automatically sense whether they need to function as crossover or straight ports, so crossover cables can connect both computers and switches/hubs.

Refer to the Product Specifications section for the types of network cable used for the different connection speeds.

Front Panel LEDs

The LEDs on the front panel indicate the real-time status of the switch.

Front Panel LED: GS-108A

Table 1 Front Panel LED Descriptions

LED	COLOR	STATUS	DESCRIPTION
PWR	Green	On	The switch is on and receiving power.
Off	The switch is not receiving power.
100/1000	Green	On	The port is operating at 1000Mbps.
Amber	On	The port is operating at 100Mbps.
Off	The port is operating at 10Mbps or no device is attached.
LNK/ACT	Green	On	The port is connected to an Ethernet network.
Blinking	The port is receiving or transmitting data.
Off	The port is not connected to an Ethernet network.
FDX/COL	Amber	On	The port is operating in full-duplex mode.
Blinking	A packet collision occurred on this port.
Off	The port is operating in half-duplex mode or no Ethernet device is

connected to this port.

Product Specifications

Standard

| IEEE 802.3 10BASE-T Ethernet,

IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab Gigabit Ethernet

IEEE802.3x Flow Control and Back-pressure

---|---
Protocol| CSMA/CD
Technology| Store-and-Forward switching architecture

Transfer Rate

| 14,880 pps for 10Mbps

148,800 pps for 100Mbps 1,488,000 pps for 1000Mbps

Connector| 5/8 Gigabit Copper: RJ-45 ; Auto-MDIX on all ports
MAC Address| 8K MAC address table
Memory Buffer| 1Mbits
Network Cable

(Up to 100m or 328ft)

| 10BASE-T: 100W 2-pair UTP/STP Cat. 3, 4, 5

100BASE-TX: 100W 2-pair UTP/STP Cat. 5

Gigabit Copper: 100W 4-pair UTP/STP Cat. 5

Backplane| GS-105A: 10Gbps

GS-108A: 16Gbps

LED| Per port: 100/1000, LNK/ACT, FDX/ COL

Per unit: PWR

Power Supply| External power DC 12V/0.8A
Power Consumption| GS-105A: 4.3 Watt (maximum)

GS-108A: 6 Watt (maximum)

Operation Temperature| 0º C to 45º C (32º F to 113º F)
Operation Humidity| 10% to 90% (Non-condensing)
Dimension| 165 x 100 x 32.5 mm (L x W x H)
EMI & Safety| FCC Class A, CE, C-Tick, UL

FAQ’s

What is the purpose of the Zyxel GS-108A 8-port Desktop Gigabit Ethernet Switch?

The switch is used to build high-performance switched networks and is designed for small office home office (SOHO) businesses.

How can I use the switch as a standalone workgroup switch?

You can directly connect computers, servers, and print servers to the switch to form a small workgroup.

How should I install the switch in an office environment?

Place the switch on a clean, dry, and smooth surface that can support its weight. Make sure there is a nearby power outlet.

How do I connect the switch to a power source?

Use the supplied power adapter to connect one end to the power port on the rear panel of the switch and the other end to a power source.

What type of Ethernet ports does the switch have?

The switch comes with 5 or 8 10/100/1000M RJ-45 ports, depending on the model. These ports support auto-negotiation and auto-MDIX.

Can I use any type of Ethernet cable for the switch?

Yes, all ports on the switch are auto-crossover, so you can use either a straight-through Ethernet cable or a crossover Ethernet cable for all connections.

What do the LEDs on the front panel indicate?

The LEDs provide real-time status information about the switch's operation. Refer to Table 1 in the user guide for descriptions of each LED.

Where can I find more detailed product specifications?

You can download the PDF user guide from the provided link: Zyxel GS-108A 8-port Desktop Gigabit Ethernet Switch User Guide.

Does the Zyxel GS-108A support Quality of Service (QoS) features?

The Zyxel GS-108A is a basic, unmanaged switch and does not offer advanced features such as Quality of Service (QoS). It operates as a plug-and-play device, automatically forwarding network traffic between connected devices without any additional configuration options. If you require advanced networking features like QoS, you may need to consider a managed switch from Zyxel or other manufacturers.

Can I use the Zyxel GS-108A switch for network expansion?

Yes, the Zyxel GS-108A switch is designed for network expansion. It provides eight Ethernet ports, allowing you to connect multiple devices to your network. By connecting additional switches to the GS-108A, you can further expand your network and increase the number of devices you can connect.

Does the Zyxel GS-108A support Gigabit Ethernet?

Yes, the Zyxel GS-108A is a Gigabit Ethernet switch. It supports data transfer rates of up to 1000 Mbps (1 Gbps) on each of its eight Ethernet ports. This allows for fast and reliable network connections for your devices.

Download this PDF Link:Zyxel GS-108A 8-port Desktop Gigabit Ethernet Switch User Guide