NEMO KEPLER Petite Lamp Instruction Manual
- June 12, 2024
- NEMO
Table of Contents
Assembly instructions
Arihiro Miyake
KEPLER petite
CODE
072KES000100
28/04/2022
Box contents
Installation
-
Check the position of the numbers (1,2 and 3) inside the canopy
-
Check the number on the wire locks
-
Adjust the orientation of Kepler petit
-
-
Connect the lock to the correspondent number inside the canopy
-
Cables length adjustment for orientation
-
Lock the cable
A- Tighten completely
B- Lock the cable -
Electrical connections
-
Lamp connection (24V)
-
110V or 230V connection
Dimming connections (1-10V)
-
Cut the exeeding cable if necessary
Be careful to leave enough cable for the electrical connection -
Canopy closure
Match the
position of the numbers (1,2 and 3) inside the canopy and the ones on the
cover -
-
Warning
IF THE DIFFUSER IS PRESSED INSIDE THE ALUMINIUM BODY OR IT IS TAKEN OUT, PLACE THE DIFFUSER IN THE RIGHT PLACE.
CAUTION
Symbols and guarantee of the fixture are described in the enclosed sheet. /
Disconnect power before proceeding with the installation of the fixture. / In
the absence of the IP symbol, fixture is only for indoor installation. / Use
only bulbs of suitable type and power specified in the label. / Safety is
guaranteed only if installation is carried out by a qualified electrician. /
Products with anodized finishes could show different color shades due to the
industrial galvanic process. Shades have to be considered as aesthetic
elements of the product. / Polishing process is hand-made. Shades are
therefore due to this manual process. / Dimensions of products made with
deformations of extrusions could be subject to changes of ±1 cm. / As blown
glass is produced by traditional craft techniques, its thickness, color and
finish are subject to variations,a feature that makes each piece unique. / Do
not install fixture in ambiences with presence of chlorine, salt air or
aggressive agents, if not expressly mentioned. / The color tempetature (CCT)
of LED sources can be different from the declared nominal value between a
range of ±5%. / NEMO reserves the right to make any technical or formal
alterations to its products without giving prior notice, especially for LED
sources. / We recommend you to keep instructions for further consultations. /
This lamp has been manufactured in conform-ity with EU Directive 2002/96/EC. The crossed-out wheelie bin symbol marked on the appliance means that it was put on the market after 13th August 2005 and that it must therefore be disposed of separately from household waste. Separate disposal of this product prevents any negative effects to public health and the environment deriving from unsuitable disposal and allows the materials it is made of to be recovered to achieve considerable savings of power and resources. The end user is responsible for delivering the appliance, at the end of its working life, to a suitable collection facility. Failure to do so will be punished according to the current national legislation. For detailed information on collection systems and methods, please contact the relative office in your town, the local waste disposal service or the shop where you purchased the product.
Lamping
LED, 55W, 2500 lm, 110-240V, 3000K , 50/60Hz dimmable 1-10V
This product contains a light source of energy class “E”
INSTRUCTIONS FOR LAMP CLEANING
To clean the lamp, use only a soft cloth.
NEMO Srl
Viale Brianza, 30 – 20823 Lentate sul Seveso (MB) ITALY
Tel +39 0362 166 05 00 – Fax +39 0362 372 996
info@nemolighting.com –
nemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>