LANCOM UF-60 Firewall Rack Mount Instructions
- June 12, 2024
- LANCOM
Table of Contents
Firewall Rack Mount UF-60
Mounting instructions
UF-60 Firewall Rack Mount
Begin mounting the power supply holding plate by screwing it to the right
mounting bracket using 4 of the 6 screws with washers ➀ provided.
Then remove the 4 housing screws on the right side of the device and align the
mounting bracket with the screwed-on power supply mounting plate on the right
side of the device housing so that you can fasten it to the device with 4 of
the 8 longer countersunk screws ➁ supplied.
Next, attach the mounting bracket to the left side of the unit after removing
the original screws. Use the remaining 4 longer countersunk screws ➁ for
this purpose.
Then, as shown in the photo, place the power supply on its mounting plate.
Place the power supply holder with the mounting area of the retaining plate as
shown, so that both mounting holes are aligned, and hand-tighten it to the
power supply retaining plate using the two remaining screws with washers ➂
provided, so that the power supply holder can still be moved.
Slide the power supply holder towards the power supply and tighten the screws
➂.
LANCOM Systems GmbH | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany
info@lancom.de
www.lancom-systems.com
© 2023 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. LANCOM,
LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered
trademarks.
All other names or descriptions used may be trademarks or registered
trademarks of their owners.
This document contains statements relating to future products and their
attributes.
LANCOM Systems reserves the right to change these without notice.
No liability for technical errors and / or omissions. 111988 01/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>