CRYSTORAMA 5036-AW-RO-MWP Tall Antique White Chandelier Lamp Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 5036-AW-RO-MWP Tall Antique White Chandelier Lamp
Product Information
This product is the Model #5036-AW-RO-MWP from Crystorama.com. It is a lighting fixture that has been lighting the way for sixty years. The fixture is Damp rated, meaning it can be used in areas with high humidity.
Product Overview and DIMENSIONS
Product Specifications
-
Part Numbers:
-
A. (1) – Mounting Hardware Wire Connector x 2 Mounting Plate x
1 Hex Nut x 1 Screw x 4 -
B. (1) – Canopy (W5 x H1); XSN5024AWCAN5IN
-
C. (2) – Ball Nut
-
D. (1) – Fixture Loop; XSN5024AWTOLOOP
-
E. (1) – Chain (4mm x 72); XSN5026AWCHA4MM
-
F. (1) – Center Column Kit Loop; XSN5026AWBOLOOP
-
G. (1) – Center Column Kit; XSN5026AWBOB4IN
-
K. (6) – 9 1/2 Arms
-
L. (1) – Finial; XSN5024AWFIN
-
Electrical Requirements: You will need 6 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. It is recommended to use LED bulbs for extended use. ****
Electrical Danger Turn Power Off
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
Warning: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.p65warnings.ca.gov.
Product Usage Instructions
- Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Attach the Center column kit to the fixture body kit using the coupling and finial.
- Attach the mounting plate onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with the fixture loop.
- Put the candle sleeve onto the socket. Dress the crystals as illustrated.
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- 1. Attach the Center column kit to the fixture body kit using the coupling and finial.
- 2. Attach the mounting plate onto the outlet box.
- 3. Decide the desired hanging height and adjust the chain to the correct length.
- 7. Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with fixture loop.
- 8. Put the candle sleeve onto the socket.
- 9. Dress the crystals as illustrated.
Crystal Sets
- A. 42 Sets. (1)14mm + AS9-2″