CRYSTORAMA 5036-AW-CL-SAQ Paris Market 6 Light White Chandelier Instruction Manual

CRYSTORAMA 5036-AW-CL-SAQ Paris Market 6 Light White Chandelier

Product Information

This product is a lighting fixture model #5036-AW-CL-SAQ manufactured by Crystorama. It has a vintage design and has been providing lighting solutions for sixty years. The fixture is damp rated, making it suitable for use in areas with high humidity.

Parts Name

The product comes with the following parts:

• A Center Column Kit
• A Mounting Plate
• A Canopy
• Ball Nuts
• A Fixture Loop
• A Chain
• Arms
• A Finial

Part Numbers

• A. (1) – Mounting Hardware
  • Wire Connector x 2
  • Mounting Plate x 1
  • Hex Nut x 1
  • Screw x 4
• B. (1) – Canopy (W5″ x H1″); XSN5024AWCAN5IN
• C. (2) – Ball Nut
• D. (1) – Fixture Loop; XSN5024AWTOLOOP
• E. (1) – Chain (4mm x 72″); XSN5026AWCHA4MM
• F. (1) – Center Column Kit Loop; XSN5026AWBOLOOP
• G. (1) – Center Column Kit
  • Threaded Nipple; H12 3/8″
  • Top Bobeche ; Ø4″, 6pin, 10.3mm center hole
  • XSN5026AWBOB6IN
  • Vase ; H8 1/4″.
  • Column Kit Parts; H3 3/4″
• H. (1) – Fixture Body Kit
  • Coupling
  • Distributor Box Cover x 2; Ø5″,10.3mm center hole
  • Distributor box ; Ø5″ ,10.3mm center hole
• I. (6) – Candle Sleeve; H4 1/8″
  • XSN5026AWCDL4.125IN
• J. (6) – Bobeche; Ø4″,4pin,10.3mm center hole
  • XSN5026AWBOB4IN
• K. (6) – 9 1/2″ Arms
• L. (1) – Finial; XSN5024AWFIN

The product requires 6 Candelabra Base Bulbs with a recommended wattage of 40 Watts. The maximum wattage for the bulbs should not exceed 60 Watts. It is recommended to use LED bulbs for extended use.

The product may contain lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.p65warnings.ca.gov.

Product Usage Instructions

1. Before installation, place the fixture parts on a soft cloth-covered platform.
2. Attach the Center Column Kit to the fixture body kit using the coupling and finial.
3. Attach the mounting plate onto the outlet box.
4. Decide the desired hanging height and adjust the chain to the correct length.
5. Raise the fixture up and make the wire connection.
6. Attach the canopy over the mounting plate and secure it with the fixture loop.
7. Put the candle sleeve onto the socket.
8. Dress the crystals as illustrated.

Ensure that all electrical components are installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Before performing any installation or maintenance tasks, turn off the power to avoid electrical danger.

HOW TO INSTALL

Place the fixture parts on a soft cloth-covered platform before installation of fixture.

1. Attach the Center column kit to the fixture body kit using the coupling and finial.
2. Attach the mounting plate onto the outlet box.
3. Decide the desired hanging height and adjust the chain to the correct length.
4. Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with fixture loop.
5.  Put the candle sleeve onto the socket.
6. Dress the crystals as illustrated.

Crystal Sets

• A. 42 Sets. (1)14mm + AS9-2″

References

• Crystorama Lighting
• p65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>