vtech 3-in-1 Launch & Go Raceway User Guide
- June 12, 2024
- vtech
Table of Contents
3-in-1 Launch & Go Raceway
User Guide
INTRODUCTION
Thank you for purchasing the Go! Go! Smart Wheels® 3-in-1 Launch & Go
Raceway™!
Race through exciting courses with the 3-in-1 Launch & Go Raceway™ by VTech®.
Rearrange the tracks and create a dual raceway, stunt track or super raceway!
This set includes a cute SmartPoint® Race Car that plays three songs and six
melodies and an action button which triggers fun movements. Drive over two
SmartPoint® locations to hear fun phrases, sound effects and melodies.
INCLUDED IN THIS PACKAGE
Go! Go! Smart Wheels® 3-in-1 Launch & Go Raceway™
One SmartPoint® Race Car| One small platform with SmartPoint® launcher| Two
short platform supports
One large platform with SmartPoint® launcher| Two tall platform supports| Two
bridge supports
One bridge| One ramp track A| One ramp track B
One jump track| One 1/4 track, male| Two adapter tracks
One sheets of labels
Parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks, removable
tags, cable ties, cords and packaging screws are not part of this toy, and
should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
Unlock the packaging locks:
- Turn the packaging lock counterclockwise several times.
- Pull out and discard the packaging lock.
GETTING STARTED
Battery Removal and Installation Race Car
- Make sure the unit is turned Off.
- Locate the battery cover on the bottom of the unit. Use a coin or a screwdriver to loosen the screw.
- Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box.
- Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
- Use new alkaline batteries for maximum performance.
- Use only batteries of the same or equivalent type as recommended.
- Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable, or new and used batteries.
- Do not use damaged batteries.
- Insert batteries with the correct polarity (+ and – ).
- Do not short-circuit the battery terminals.
- Remove exhausted batteries from the toy.
- Remove batteries during long periods of non-use.
- Do not dispose of batteries in fire.
- Do not charge non-rechargeable batteries.
- Remove rechargeable batteries from the toy before charging (if removable).
- Rechargeable batteries are only to be charged under adult supervision.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
LABEL APPLICATION
Please stick the labels to the playset securely as indicated on the following pages:
ASSEMBLY INSTRUCTIONS
With the Go! Go! Smart Wheels® 3-in-1 Launch & Go Raceway™, safety comes first. To ensure your child’s safety, adult assembly is required.
- Attach the tall platform supports to the small launcher platform. You will hear a “click” sound to indicate the pieces are secure. Once the pieces are connected, they cannot be detached.
- Attach the short platform supports to the large launcher platform. You will hear a “click” sound to indicate the pieces are secure. Once the pieces are connected, they cannot be detached.
- Attach the bridge supports to the bridge. You will hear a “click” sound to indicate the pieces are secure. Once the pieces are connected, they cannot be detached.
After the above steps, connect these pieces to the included track pieces. You can configure them into different shapes.
You are now ready to play! Connect the track pieces together. Or connect them to other Go! Go! Smart Wheels® playsets (each sold separately).
Note
SmartPoint® vehicles respond to SmartPoint® locations with different phrases, music or fun sound effects (each sold separately).
Note
If the unit powers down or if the light fades out during play, please install a new set of batteries.
RACE CAR FEATURES
-
On/Off/ Switch
To turn the Race Car On, slide the On/Off Switch to the On position. To turn the Race Car Off, slide the On/Off Switch to the Off position. -
Automatic Shut-Off
To preserve battery life, the included Race Car will automatically shut off after approximately 60 seconds without input. The unit can be turned on again by pressing the light-up button or by pushing the Race Car quickly.
NOTE
This product is in Try-Me mode in the packaging. After opening the package,
turn the vehicle off and on again to proceed with normal play. If the unit
powers down while playing, please install a new set of batteries.
ACTIVITIES
Race Car
- Slide the On/Off Switch to turn the unit On. You will hear race car sounds, a song and a phrase. The light will flash with the sounds.
- Press the Light-Up Button to hear sounds, songs, phrases and melodies. The light will flash with the sounds.
- Press the Action Button on the vehicle to activate a mechanical function on the vehicle and hear fun sounds. The light will flash with the sounds.
- Push the Race Car to hear fun sounds and melodies. While the melody is playing, push the Race Car again to add in fun sounds on top of the melody. The light will flash with the sounds.
- For added fun, the Race Car interacts with the Go! Go! Smart Wheels® 3-in-1 Launch & Go Raceway™. Simply place the Race Car on one of the two SmartPoint® locations to see the Race Car’s light flash and to hear fun sounds, short tunes and phrases. The Race Car also interacts with other Go! Go! Smart Wheels® playsets (each playset sold separately).
MELODY LIST
- Aiken Drum
- Skip to My Lou
- Camptown Races
- Ta Ra Ra Boom De Ay
- Old King Cole
- Little Bitty Pretty One
SING-ALONG SONG LYRICS
Song 1
Vroom, Vroom time to zoom
Vroom, Vroom time to zoom
Vroom, Vroom time to zoom
Join me, watch me race and zoom!
Song 2
Oh, let’s go racing all day long
Faster than fast, quicker than quick
Oh, let’s go racing all day long
I’m brave and fast and strong
Song 3
Go! Go! Smart Wheels,
Go! Go! Smart Wheels,
I’m a Go! Go! Smart Wheels Race Car,
Let’s speed around the track (Go! Go!)
We’ll zoom ahead, just try and catch me
Let’s Go! Go! and see! (Go! Go!)
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
- Please turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit sit for a few minutes, then replace the batteries.
- Turn the unit On. The unit should now be ready to play again.
- If the product still does not work, install a new set of batteries.
IMPORTANT NOTE
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the U.S.,
1-877-352-8697 in Canada, or visit
our website vtechkids.com and fill out our Contact Us
form located under the Customer Support link. Creating and developing VTech
products is accompanied by a responsibility that we take very seriously. We
make every effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A service
representative will be happy to help you.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: | VTech® |
---|---|
Model: | 5275 |
Product Name: | Go! Go! Smart Wheels® |
3-in-1 Launch & Go Raceway™
Responsible Party:| VTech Electronics North America, LLC
Address:| 1156 W. Shure Drive, Suite 200
Arlington Heights, IL 60004
Website:| vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
- THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
- THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Visit our website for more information about our products, downloads,
resources and more.
vtechkids.com
vtechkids.ca
Read our complete warranty policy online at
vtechkids.com/warranty
vtechkids.ca/warranty
TM & © 2019 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003774-009
References
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>