JBL WFH100 USB Mic and Speaker Bundle User Guide
- June 12, 2024
- JBL
Table of Contents
JBL WFH100 USB Mic and Speaker Bundle User Guide
BOX INCLUDES
i. CSUM06 mini USB microphone
ii. CSDM04 USB powered speakers
iii. USB cable
CONNECTING THE SPEAKER
Connect the CSDM04 with the computer using the USB cable that is attached to the speaker. Rotate the volume knob clockwise till it clicks & the speaker turns DN. The white LED will turn DN indicating that it is receiving power.
FEATURES
i. Easy to setup
ii. Powered by single USB cable
iii. Built-in 2 x USB ports
iv. Compact & stylish design
v. Microphone with cardioid pickup pattern
vi. USB plug-&-play operation
vii. Convenient mute switch
SPECIFICATIONS
The speaker with the volume control is the right speaker. Connect the cable with RCA connector to the other speaker which is the left speaker. Adjust the volume control of the speaker according to your need.
The headphone port can be used to connect a wired headphone. As soon as the headphone is connected, the speakers will be muted. The volume knob controls level for both speaker & headphone out.
CONNECTING THE MICROPHONE
The CSUM06 USB microphone can be connected to any of the USB ports on the right speaker using supplied cable. The other port can be used to connect USB devices such as thumb drives & card readers to the computer.
Once the CSUM06 is connected to the computer, the LED on the microphone will glow white indicating that the mic is ON. The drivers for the microphone will auto-install & it will be ready to use in a few minutes. This microphone captures sound from the front & not from the top.
CSUM06 mini USB microphone & CSDM04 USB powered speakers can be used separately as well.
MICROPHONE CONTROLS
Mute button: Press to Mute/Unmute the microphone. The LED in the front will
indicate the status.
White LED: Microphone picks up sound normally. Red LED: Microphone is in mute
state
SOFTWARE SETUP
Using CSUM06 & CSDM04 with PC [Windows 7, 8.1, 10 or higher)
i. Connect to your PC using the supplied USB cable
ii. Go to the start menu and select the control panel
iii. Click on the sound icon from the control panel
iv. In the recording tab, select JBL Commercial CSUM06
v. In the playback tab, select JBL Commercial CSDM04
vi. Set the output volume to comfortable level
Using CSUM06 with Mac [Mac OS 10.10 or higher)
i. Connect to your Mac using the supplied USB cable
ii. Open system preferences and select the sound icon
iii. In the input tab, select JBL Commercial CSUM06
iv. In the output tab, select JBL Commercial CSDM04
v. Set the output volume to comfortable level
All product images shown are for illustration purpose only and may not be an exact representation of the product. Actual product may vary in colour, size and finishing. ©2021 HARMAN International Industries, Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>