Planet Buddies 45883 Wireless Headphones User Manual

: June 5, 2024
: Planet Buddies

Planet Buddies 45883 Wireless Headphones

Overview

Functions & Features

Child-safe 85db volume limited audio to protect hearing
Wireless compatible with iOS/ Android
Up to 38-hour total playtime (2 hours charging time)
Built-in microphone
Extra line-out jack for music sharing
Strong, adjustable design for comfort and durability
Foldable, portable design with carry pouch included

Included

1 x Headphones
1 x User manual
1 x AUX-in cable
1 x Type C charging cable
1 x Carry pouch

Technical Specifications

Profiles supported: A2DP/AVRCP/SMP/HFP
Working range: 8-1 OM
Resistance: 320+ 15%
Sensitivity: 85+ 3d b at 1 KHZ
Frequency range: 20HZ ~ 20KHZ
Charging voltage: SV
Charging current: S00mAh
Operating voltage: 3.7V
Operating current: 8MA ~ 1 SMA

LED indicator light

Pairing: Flashes red a1nd blue
Power on: Static blue
Music playing: Flashes blue slowly
Standby mode: Static blue
Incoming call: Flashes blue quickly
Low battery: Flashes red quickly
Charging: Static red, t urns off when charged

User Instructions

Turn On

To turn ON the wireless headphones, press and hold for 3 seconds. The headphones will turn on after the blue LED light has stayed on for 3 seconds.

Turn Off

To turn OFF the wireless headphones, press and hold for 3 seconds. The headphones will turn off after the red LED light has stayed on for 3 seconds.

Volume Adjustment

Press + or – to adjust the volume.

Wireless Mode

Hold for 3 seconds to turn on the headphones. The LED indicator light wil l flash red and blue alternately unti l the headphones are successfully connected. Ensure that the headphones are no more than 10 meters away from the device you want to pair. Use the Bluetooth search list on your device to find and select ‘PB Penguin HP’ to pair with the headphones. To confirm you have paired the head phones successfu I ly with your device, the LED indicator light will stop flashing and show static blue.

Music Selection

Press > to SKIP to the next song.
Press < to SKIP to the previous song.
Press to PAUSE the music when playing.
Press to PLAY the music when paused.

Hands-free Calls

Press to ANSWER when a cal l is incoming.
Press to HANG UP when on a call.
Hold for 3 seconds to REJECT when a call is incom1ing.
If the headphones are connected to your mobile phone, double p,ress to re-dial the last phone number in your call record.

Charging

When the battery is running low, the LED indicator light will start flashing red and the headphones will issue an audible warning.
To recharge the headphones, insert the USB charging cable into the port on the earcup and connect with a compatible power source(laptop, computer, or via a mains plug adapter).
To indicate that the headphones are charging, the LED indicator light will show static red which\ wil l then switch off when fully charged.

Power Status

When the headphones are connected with an iOS device (and SOME And raid devices), the current power status of the headphones will be shown in the upper right corner of the device screen.

Line-in Mode

To listen via the AUX-in cable, insert the cable into the line-out port on the right earcup. If you would like to listen to music wirelessly, you need to remove the AUX-in cable and turn on the wireless mode.

Connect any second pair of headphones via the extra line-out port on the left earcup tolisten to the same music. This is compatible with the wireless mode and the line-in mode.

Warranty

This product is covered under a 12 month limited warranty for product defects. This warranty does not cover products which have been:

damaged by consumer;
opened and/or altered in any way;
subject to normal wear and tear.

If you are experiencing any issues with your product that you can not resolve using this user manual, please contact us at [email protected], attaching proof of purchase, along with a photo of the defect.

Please read and keep all safety and use instructions.

Important Safety Instructions

Read these instructions.
Keep these instructions.
Heed al l warnings.
Fol low all instructions.
Do not install near any heat sources such as rad iators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to q ual ified personnel. Servicing is requ ired when the apparatus has been damaged in any way, such as power-supply cord or pl ug is damaged, objects have fallen into the apparatus, does not operate normal ly, or has been dropped.

Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
Do NOT make unauthorized alterations to this product.
Do NOT use a power inverter w ith this product
Use this product only with the power supply provided.
Where the mains plug or an appl iance coupler is used as the disconnect device, the disconnectdevice shall remain readi ly operable.
Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunl ight, fire or the like).

ATTENTION: THIS PRODUCT IS NOT A TOY. NOT SUITABLE FOR USE BY PERSONS UNDER 3 YEARS.

The crossed-out wheel ie bin symbol means that the product must be disposed of separately in the European Union. These products must not be disposed of with unsorted household waste.

We, STRAX GmbH, declare under our sole responsibil ity, that the product “Planet Buddies Wireless Penguin Headphones (PBPGHPW)” conforms with the pro vis ions according to directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address: https://www.strax.com/compliance/

Distributor and EU importer: STRAX GmbH, Belgische Allee 52+54, 53842 Troisdorf, Germany, www.strax.com

For Europe

Frequency band of operation 2402 to 2480 MHz
Bluetooth: Maximum transmit power less than 20 dBm EIRP
Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP

Regulatory Information

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, t he user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance cou ld void t he user’s authority to operate the equipment.

This device compl ies with part 15 of the FCC Ru les. Operation is subject to the fol lowing two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This manual is available online in other languages.
Please visit www.planetbuddies.com/manuals