JLAB JBuds Air Pro True Wireless Earbuds User Manual

JLAB JBuds Air Pro True Wireless Earbuds User Manual

support@jlab.com 
jlab.com/contact

jlab.com/register

BLUETOOTH PAIRING

1. Take earbuds out of case and remove stickers. Place earbuds back in case and close door.
2. Blue lights on case indicates charging. Remove earbuds from case.
3. One earbud will blink blue/white indicating ready to pair to your device.
   Select “JLab JBuds Air Pro” in your device’s Bluetooth settings.

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:

Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device.
Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air Pro” in new device settings to connect.

BUTTON FUNCTIONS

VOICE PROMPTS

“Ready to Pair”: JBuds Air Pro are ready to pair to Bluetooth device
“Battery Full”: 100-80%
“Battery Medium”: 80-20%
“Low Battery”: Less than 20%
When power decreases to 10%,
“Low Battery” will play

TURN OFF WITHOUT CHARGING CASE: Turn off Bluetooth from device settings. Earbuds will power off after 3 minutes.

CUSTOM EQ3 SOUND MODES

Tap either the right or left earbud 3 times for different EQ settings (JBuds Air Pro will cycle 3 EQ settings).

CHARGING EARBUDS

Placing in the charging case will auto power OFF and start charging. Blue lights will indicate earbuds are charging and will turn OFF when fully charged. Removing the earbuds will auto power ON and connect to last device.

CHARGING CASE

Connect the JBuds Air Pro to computer or USB 5V 1A (or less) output device. LEDs pulse white when charging and turn solid white when fully charged.

MULTIPOINT (connect 2 devices simultaneously)

FITTING

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD OR EARBUDS DISCONNECTED (MANUAL RESET)

Instructional videos at: JLAB.COM/MANUALS

QUICK TIPS

• Either earbud can connect to your device and be used independently. Simply take out the earbud from charging case and it will auto connect.
• Choosing the correct ear tip makes a significant improvement in audio quality due to proper seal for the driver. Try all ear tips for best results.

WARNING

Fully dry off the earbuds before putting in the charging case to avoid any damage to the case.
The earbuds are sweat/water resistant but the case is not.

CAUTIONS

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing the earbuds.

• Wax may build up in the earbud tips, lowering the sound quality.
  Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones JLab Store + Burn-in Tool

References

• JLab: True Wireless Headphones, Earbuds, Microphones, Personal Audio
• Contact Us – JLab
• JLab Product Manuals
• Register Your Product – JLab

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>