NEEWER GL1 Live Gaming & Streaming LED Light Instruction Manual

GL1 Live Gaming & Streaming LED light
Instruction Manual

OVERVIEW

Introduction to functions

| Wi-Fi indicator 1 in 3 indicator lights are lit : Wi-fi is disconnected LEDs pulsate in a cycle : Bluetooth connecting All LEDs are lit: Wi-Fi successfully connected:
---|---
| Color temperature Power on the device. Rotate the “CCT’ thumb wheel to adjust the color temperature from 2900 to 7000K (increasing in increments of 100k).
| Brightness Power on the device. Turn the “DIM” thumb wheel to adjust the brightness from 0% to 100% (increasing in increments of 1%).
| Long press (power switch)/ short press (standby: on/off) Long pressthe-power switch/wake up (standby)” button to turn the lamp on/off. Short press to enter standby/wake up.
| Bluetooth indicator 1 out of 3 indicator lights are lit: Bluetooth is disconnected All LEDs are lit: Bluetooth successfully connected.

Mobile phone APP control

|
---|---

<https://play.google.com/store/apps/details?id=neewer.nginx.annularlight>

|

<https://itunes.apple.com/cn/app/neewer/id1455948340?mt=8>  

1. Scan the QR code above to download the “NEEWER” APP, register as a new user and log in.
2. After turning on the GL1, please ensure that the Bluetooth indicator light is lit by one third.
3. Open the APP and click the “+” in the upper right corner to connect to the device.
4. Select the “Bluetooth” connection option.
5. Select “NEEWER-GL1” to connect and the GL1 Bluetooth indicator will be fully illuminated after successful connection.
6. Click on the GL1 device icon to enter the control page. You can now use the app to control the GL1 light.

Computer control

4.1.PC computer control

1. Tap the “NEEWER” APP on the mobile phone to enter the Gil control panel interface. Tap the “ ” icon, enter the account and password of the WI FL network to be connected to. This will allow you to connect the GL1 to the Wi-Fi network.
     The computer and mobile phone must be on the same network as the GL1 lamp to enable wireless control.

2. Enter the following URL (https://neewer.com/ pages/down load-product-firmware) into your web browser and do unload and install “NEEWER live”.  When you install the newer live program, it is recommended that you manually add it as a trusted program if you encounter an error reported by the computer anti-virus software.
   If your Windows 7 computer doesn’t have the . net framework, it will automatically direct you to the .net official website to download it.

3. Enter “NEEWER live”, click “Add Device”.

4. Select “GL1” and click “OK” to add.

5. After successfully adding the GL1 light, enter the control panel page to use it.

4.2.Apple computer control

1. Download and install “NEEWER live” from the “APP store”. Turn on the computer’s Bluetooth.
2. Enter “NEEWER live” and select “GL1”, then tap “Add Device” to add it.
3. After successfully adding the GL1 light, enter the control panel page to use it.

Installation steps

Loosen/tighten the “stand adjustment knob” and adjust it to the required position.

Align the C-shaped bracket on the corner of the table and turn the ‘stand secure knob” clockwise until it is securely fastened to the table.

1. Rotate the “adapter’ screw into the threaded hole of the ‘lamp body”;
2. Rotate the “stand” screw into the screw thread of the “adapter”.

Use the adapter to angle it to a suitable position.
Loosen off the “stand adjustment knob” in order to adjust the stand to the appropriate height and then re-tighten to secure.

Safety Notes

• Please do not stare at the light directly while it is in use to prevent the risk of visual impairment.
• Please do not cover the heat dissipation holes on the item with clothes or other items to prevent the risk of product damage.
• For all Android smartphones, it is necessary to first turn on the “GPS”.
• Please do not touch the product with wet hands as this is very likely to damage the circuit board.
• Please do not dismantle or modify the circuit of the item.
• Please do not use the item in the rain or in damp conditions.
• Please turn off the item when it is not in use.
• Failure to comply with the operation procedures and warnings listed in the manual will void the warranty.

Product Specifications

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.

Shenzhen Newer Technology Co. ,Ltd.
Room 1903, Block A, Lu Shan Building No. 3023
Chuffing Rd Luo Hu District, Shenzhen
Guangdong 518001, China
Ling Feng Electronic (UK) Ltd International House, 10 Churchill Way, Cardiff, CF10 2HE
NW Formations GmbH(for authorities only) Hoferstrasse 9B, 71636 Ludwigsburg, Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>