PHILIPS WT065C G3 Ledinaire Waterproof Instruction Manual
- June 12, 2024
- Philips
Table of Contents
Luminaire
Waterproof
WT065C G3
WT065C G3 Ledinaire Waterproof
Product Description| CCT(K)| System light output(Lm)| p(w)| Energy Efficiency
Class
of Light source| Dimensions (mm)
L| A|
---|---|---|---|---|---|---|---
WT065C G3 LED18S/840 PSUL600 BN| 4000| 1800| 16| D| 607| 210-350| 0.75
WT065C G3 LED245/840 PSU L1200 BN| 2400| 22| D| 1207| 660-880| 110
WT065C G3 LED48S/840 PSU L1200 BN| 4800| 44| D| 1207| 660-880| 1.15
WT065C G3 LED355/840 PSU L1500 BN| 3500| 31| D| 1507| 960-1160| 1.35
WTO65C G3 LED68S/840 PSU L1500 BN| 6800| 53| C| 1507| 960-1160| 1.40
WT065C G3 LED745/840 PSU L1500 BN| 7400| 54| C| 1507| 960-1160| 1.40
| L ED185| LED245| LED485 LED355| LED685| LED745
---|---|---|---|---|---
(max| 9.| 5.| 6.| 5.| 7.| 7.
Tref [us]| 175| 47| 47| 47| 58| 58
Max. flr of products
Drivers/ MC816A typel3fmax.1| 72| 60| 45| 60| 30| 30
Drivers/ MC810Atypet3(max]| 45| 37| 28| 37| 18| 18
Drivers/ MC816AtypeC[max.)| 122| 102| 76| 102| 51| 51
Drivers/ MC810Atypegmax.1| 74| 62| 46| 62| 31| 31
ATTENTION
BSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Do not store/install/use the luminaire in corrosive environment with hazardous substances, e.g., Sulphur, chlorine, phthalates etc. or on the location where it is exposed to conductive dust, heavily grease (esp. mineral oil or distillates, e.g., petroleum), heavily naphthenic treated with hydrogen.
- This product is not suitable for cold & humid storage areas, especially where obvious temperature gradients are present, such as ventilation opening, door, etc.
- Do not install the luminaire on the location where it is exposed to direct sunlight. UV radiation will damage the material over time, resulting in loss of waterproof sealing and IP65 rating.
- Do not stare into LED light beam.
Disconnect before servicing
The light source and lord control gear and/or the external flexible cable
countified in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
This product contains a ight source of energy efficiency class: see table or
label.
Storage, installation, use, operation and maintenance of the products needs to
be performed exactly according the instructions in this manual and lor other
instructions as may be provided by us to guarantee safe use of the product
over its entire lifetime. Failure to adhere to these instructions will
invalidate your entitlement to warranty. Bolls with indication of torque
strength on the drawing need to be tightened using a calibrated torque wrench.
Pre-assembled bolts need to be retightened again to the required torque
specification to assure maximum strength over life time.