digital essential GA-0127 Bluetooth Transmitter Instruction Manual

digital essential GA-0127 Bluetooth Transmitter Instruction Manual

Product Overview

Package Contents

• Bluetooth Wireless Transmitter x 1
• Micro USB Charging Cable x 1
• Instruction Manual x 1

Technical Specifications

Bluetooth Range: ………………………………… 32.8 Feet
Audio Input: ……………………………………….. 3.5mm jack
Rechargeable Li-ion Battery: ………………………………… 3.7 V
Battery Capacity: …………………………………………. 120 mAh
Operation Current: …………………………………. <20mA
Charging Time: ……………………………………. 2 Hours
Working Tirne: ………………………………… 4 5 Hours Micro USB Charging Cable Included

How to use the Transmitter

1. Insert 3.5 plug of Bluetooth Wireless Transmitter into 3.5mm socket of the audio player.
2. Press the ON/OFF button on the Bluetooth Wireless Transmitter to turn on the power and set under painng mode.
3. The blue LED will flash quickly under pairing mode.
4. Turn on the power of Bluetooth Device (Headphone/Earphone/ Speaker) and set under pairing mode.
5. The Bluetooth Wireless Transmitter will search the Bluetooth device and pair automatically. After successful pairing, the blue LED will become slow flash.
6. The Bluetooth Wireless Transmitter just can connect one Bluetooth device at one time. If you want to connect another Bluetooth device, the current Bluetooth device should be turned off or disconnected.
7. If the Bluetooth Wireless Transmitter does not be paired with any Bluetooth devices within 5 minutes, it will be power off automatically.
8. When Bluetooth Device (Headphone/Earphone/Speaker) is paired, the music is muted during playback when the button is pressed, and will be unmuted when press the button again.

Charging your Transmitter

 For your safety, please always use appropriate 5V input charger! Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product. as it might damage the product

1. Use the Micro USB charging cable provided with this Bluetooth Wireless Transmitter.
2. Connect the Micro USB plug to Micro USB charging port on the Bluetooth Wireless Transmitter, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. LED indicator light turns red when charging your Bluetooth Wireless Transmitter. 3. The light will turn Red while charging and will turn off once fully charged.

Make sure the Bluetooth Wireless Transmitter is fully charged before initial use.

NOTE:

• You must select a qualified charger from a regular manufacturer.
• You must charge the Wireless speaker if it has been not used for more than 12 months.

FAQ

1. There is no sound from Bluetooth device.
   Ans: 3.5mm plug should be connected with a audio source device and make sure there is signal input to the Bluetooth Wireless Transmitter.

2. Why the Bluetooth Wireless Transmitter can not be paired with the Bluetooth device?
   Ans: Both Bluetooth Wireless Transmitter and Bluetooth device should be set under pairing mode (Disconnect the pairing with other device)

Safety instructions for the lithium battery and charging the product

• The input voltage to the product is 5V 1A.
• In order to charge the product in safe manner and reliable conditions. please only adopt certified appropriate charger/ adapter for charging the product.
• Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
• Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into fire.
• Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property. and we cannot control the operating process during the time the user using this product.
• In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion. heat generation, fire development or smoke development.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2ADM5-GA-0127

Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106

Keep all relevant information for future reference

Documents / Resources

| digital essential GA-0127 Bluetooth Transmitter [pdf] Instruction Manual
GA-0127, GA0127, 2ADM5-GA-0127, 2ADM5GA0127, GA-0127 Bluetooth Transmitter, GA-0127, Bluetooth Transmitter
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>