Electronic World ELECTRO SPLASH Bluetooth Speaker Instruction Manual

Electronic World ELECTRO SPLASH Bluetooth Speaker

Specifications

• Compliance: Part 15 of FCC Rules

• Radiation Exposure Limits: FCC compliant for uncontrolled
  environment

• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Installation

1. Reorient or relocate the receiving antenna to optimize signal reception.
2. Ensure there is adequate separation between the equipment and receiver to prevent interference.
3. Connect the equipment to a power outlet on a different circuit than the receiver to avoid signal disruption.

Operation

Follow these guidelines during operation:

• Avoid placing the equipment in close proximity to other electronic devices to prevent interference.
• Do not tamper with the device’s internal components as it may affect performance.
• Maintain a minimum distance of 0cm between the equipment’s radiator and your body during operation.

Safety Precautions

Ensure the following safety measures are observed:

• Do not operate the equipment in a high humidity environment to prevent damage.
• Avoid exposing the equipment to extreme temperatures or direct sunlight.
• Keep the device away from water or moisture to prevent electrical hazards.

OPERATING PANEL

POWER BUTTON

• Power ON/OFE – Press for 1.5 seconds to turn it ON or OFF.
• Force Restart- Long press for 3 seconds to force it to restart.
• Mode Switch – Short press BT – AUX – USB.
• Enter/Exit TWS mode – Double press to enter or exit TWS mode.

MUSIC a VOLUME JI

• Volume UP – Short press to increase the volume.
• Next song – Long press 1.5 seconds to move to the next song.

MUSIC & VOLUME

• Volume down – Short press to decrease the volume.
• Previous song – Long press 1.5 seconds to move to the previous sona

PAUSE & PHONE CALL

• Play/Pause – Short press to pause or play a song.
• Answer/End Phone Call – Short press to answer. During the call, short press to end the call.
• Reject a call – Incoming call, long press 1.5 seconds to reject.
• Voice assistant – Under BT mode, long press for 1.5 seconds.
• Redial last number – Under BT mode, press 2 times.
• Clear Bluetooth pairing information – Under BT mode, please disconnect the speaker first, then press the button 5 times.
• Disconnect Bluetooth – Under BT mode, press 4 times.

PAUSE the PHONE CALL

• Play/Pause – Short press to pause or play a song.

• Answer/ End Phone Call – Short press to answer. During the call, short press to end the call.

• Reject a call – Incoming call, long press 1.5 seconds to reject.

• Voice assistant – Under BT mode, long press for 1.5 seconds.

• Redial last number – Under BT mode, press 2 times.

• Clear Bluetooth pairing information – Under BT mode, please disconnect the speaker first, then press the button 5 times.

• Disconnect Bluetooth – Under BT mode, press 4 times.

• USB PORT

• TYPE – C PORT

• AUX PORT

HOW TO CHARGE

• Locate the Type-C charging able: Find the Type-C charging cable that came with your speaker.
• Connect Type-C cable to the speaker: Insert the small end of the Type-C charging cable into the charging port located on the side of the speaker.
• Connect the cable to a power source: If using a computer, insert the larger end of the charging cable into a USB port on your computer.
• Verity the connection: Ensure that the connections are secure and the charging indicator on the speaker is illuminated, indicating that it is charging.

PRODUCT SPECIFICATIONS

• Input: DC SV lA
• Output Power: 1*8W
• Battery Capacity: 2200mAh
• Bluetooth Version: 5.4
• Transmission Distance: 10 meters
• 50% Volume Play Time: 4-6 Hours
• Protection Grade: IPXS Waterproof
• Charing Interface: Type-C

CONTENTS

• 1 x Waterproof Wireless Speaker
• 1 x USBA-CCharging Cable
• 1 x AUX Audio Cable
• 1 x Instruction Manual

FCC

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: A ny changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance Ocm between the radiator and your body.

Frequently Asked Questions

• Q: What should I do if I experience interference with the equipment?
  • A: Reorient or relocate the receiving antenna and ensure proper separation between devices to minimize interference.
• Q: Can I modify the internal components of the device for better performance?
  • A: No, tampering with internal components can void the warranty and may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>