CRYSTORAMA 5036-VB-CL-SAQ Six Light Chandelier Instruction Manual

CRYSTORAMA 5036-VB-CL-SAQ Six Light Chandelier

Product Information

The model number of the product is 5036-VB-CL-SAQ. The product is manufactured by Crystorama.com. It is a lighting fixture that has been in the market for sixty years. The fixture is Damp rated, meaning it can be installed in areas with high humidity but not directly exposed to water. This product requires 6 Candelabra Base Bulbs with a recommended wattage of 40 Watts, but a maximum wattage of 60 Watts. It is advised to use LED bulbs for extended use. The product comes with various parts including a mounting plate, canopy, ball nut, fixture loop, chain, center column kit, and crystal sets. The crystal sets consist of 42 sets with a combination of 14mm crystals and AS9-2 crystals.

There is a warning that the product contains Lead, which is known to cause cancer and/or birth defects or reproductive harm. For more information, refer to www.p65warnings.ca.gov.

Product Usage Instructions

1. Before installation, place all the fixture parts on a soft cloth-covered platform.
2. Attach the Center column kit to the fixture body kit using the provided coupling and finial.
3. Attach the mounting plate onto the outlet box.
4. Decide the desired hanging height and adjust the chain to the correct length.
5. Raise the fixture up and make the wire connection. Attach the canopy over the mounting plate and secure it with the fixture loop.
6. Put the candle sleeve onto the socket.
7. Dress the crystals as illustrated in the manual.

Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Ensure to turn off the power before starting any electrical work.

ASSEMBLY INSTRUCTION

MODEL #5036-VB-CL-SAQ

WARNING:
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 6- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Damp rated

HOW TO INSTALL

Place the fixture parts on a soft cloth-covered platform before installation of fixture.

1. Attach the Center column kit to the fixture body kit using the coupling and finial.
2. Attach the mounting plate onto the outlet box.
3. Decide the desired hanging height and adjust the chain to the correct length.
4. Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with fixture loop.
5. Put the candle sleeve onto the socket.
6. Dress the crystals as illustrated.

Crystal Sets

A. 42 Sets. (1)14mm + AS9-2″

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov

Part Numbers

• Mounting Hardware
  • Wire Connector x 2
  • Mounting Plate x 1
  • Hex Nut x 1
  • Screw x 4
• Canopy (W5″ x H1″); XSN5024VBCAN5IN
• Ball Nut
• Fixture Loop; XSN5024VBTOLOOP
• Chain (4mm x 72″); XSN5026VBCHA4MM
• Center Column Kit Loop; XSN5026VBBOLOOP
• Center Column Kit
  • Threaded Nipple; H12 3/8″
  • Top Bobeche ; Ø4″, 6pin, 10.3mm center hole
  • XSN5026VBBOB6IN
  • Vase ; H8 1/4″.
  • Column Kit Parts; H3 3/4″
• Fixture Body Kit
  • Coupling
  • Distributor Box Cover x 2; Ø5″,10.3mm center hole
  • Distributor box ; Ø5″ ,10.3mm center hole
• Candle Sleeve; H4 1/8″
  • XSN5026VBCDL4.125IN
• Bobeche; Ø4″,4pin,10.3mm center hole
  • XSN5026VBBOB4IN
• 9 1/2″ Arms
• Finial; XSN5024VBFIN

Crystorama.com

References

• Crystorama Lighting
• p65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>