HP PS100 Mobile Scanner User Guide

HP PS100 Mobile Scanner

Product overview

Setting up the scanner

1. Remove protective tape from the scanner and inside the feeder.
2. Connect the scanner to your computer using the USB cable.
3. Turn on the scanner with the power button.
4. Install the HP WorkScan software at hpworksolution.com/setup to start using your scanner.

Operating the scanner

NOTE : Only one sheet of paper can be inserted into the scanner at a time. Trying to scan more than one page at a time may cause scanner to malfunction.

1. Make sure that the scanner is turned on.
2. Insert your document into the scanner against the left feeder edge. Make sure your document is facing up and the top edge of the document is going into the feeder slot first.
3. Slide the paper guide against the right side of the document.
4. Gently push the document into the feeder slot. Activate the scan from the software or press the scan button on the scanner.
   NOTE: Scan button only works with the HP WorkScan software.

Pro tips

• Only calibrate the scanner when scanner hasn’t been used recently, scanned images are fuzzy, or color looks inaccurate.
• Keep the included calibration sheet away from dust and debris.
• Make sure your documents are free of staples, paper clips, or other debris that may cause scan to malfunction.
• Do not push your document into the scanner during operation.
• Avoid scanning certain materials. (Ex. wrinkled material, cloth, newspapers, or magazines.)
• Clean the scanner after 200 scans or if vertical lines or stripes appear on the scanned images.

Safety precautions

• Please turn off and unplug the scanner when not in use for long periods of time.
  Power rating: 5Vdc, 0.5 A

• Do not use scanner if any parts are missing or damaged.

• Do not attempt to disassemble or repair the scanner yourself.

• Do not use any solvents or corrosive liquid to clean any part of the scanner.

• Keep scanner out of direct sunlight and humid, dusty environments.

• Always place the scanner on a flat, level surface.

• The power input for this scanner is 5 V, 0.5 A. Use only with the USB cable supplied with the product.

Function & LED guide

Need help?
Get in touch by live chat at www.hpworksolutions.com, emailing us at support@hpworksolutions.com, or calling 1-877-424-9746.

To watch a quick instructional video, view the manual with complete instructions, or learn more about your HP Mobile Scanner, please visit www.hpworksolutions.com/setup or scan the QR code:

References

• hpworksolution.com
• Compact and Reliable Office Technology by HP WorkSolutions
• Product Setup Guide | HP WorkSolutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>