CRYSTORAMA 5026-VB-CL-SAQ Six Light Chandelier Paris Market Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 5026-VB-CL-SAQ Six Light Chandelier Paris Market
Product Information
Model: #5026-VB-CL-SAQ
Manufacturer: Crystorama
Website: www.crystorama.com
Product Features
- Fixture Type: Chandelier
- Recommended Bulb Type: Candelabra Base Bulb
- Recommended Bulb Wattage: 40 Watts
- Maximum Bulb Wattage: 60 Watts
- Use LED Bulbs for Extended Use
- Damp Rated
- Includes Crystal Sets for decoration
- Assembly Required
- Product Warning: Contains Lead
Product Usage Instructions
- Before installation, place the fixture parts on a soft cloth-covered platform.
- Attach the Center column kit to the fixture body kit using the coupling and finial.
- Attach the mounting plate to the outlet box.
- Determine the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and perform the wire connection.
- Attach the canopy over the mounting plate and secure it with the fixture loop.
- Put the candle sleeve onto the socket.
- Dress the crystals as illustrated using the provided crystal sets.
Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Turn off the power before installing any electrical components.
Recommended Bulbs:
Use 6 Candelabra Base Bulbs with a recommended wattage of 40 Watts. The maximum wattage allowed is 60 Watts. For extended use, it is recommended to use LED bulbs.
Product Warning:
This product contains Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.p65warnings.ca.gov.
Dimensions
Crystal Sets
A. 6 Sets. (3)14mm + (1)Square + (3)14mm + AS9-2″
B. 12 Sets. (18)14mm
C. 30 Sets. (1)14mm + AS9-2″
D. 6 Sets. (1)Square + (1)14mm + AS9-2″
E. 6 Sets. (13)14mm
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 6- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Attach the Center column kit to the fixture body kit using the coupling and finial.
- Attach the mounting plate to the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with fixture loop.
- Put the candle sleeve onto the socket.
- Dress the crystals as illustrated.
ASSEMBLY INSTRUCTION
Part Numbers
- A. (1) – Mounting Hardware
- Wire Connector x 2
- Mounting Plate x 1
- Hex Nut x 1
- Screw x 4
- B. (1) – Canopy (W5″ x H1″); XSN5024VBCAN5IN
- C. (2) – Ball Nut
- D. (1) – Fixture Loop; XSN5024VBTOLOOP
- E. (1) – Chain (4mm x 72″); XSN5026VBCHA4MM
- F. (1) – Center Column Kit Loop; XSN5026VBBOLOOP
- G. (1) – Center Column Kit
- Threaded Nipple; H12 3/8″
- Top Bobeche ; Ø4″, 6pin, 10.3mm center hole
- XSN5026VBBOB6IN
- Vase; H8 1/4″.
- Column Kit Parts; H3 3/4″
- H. (1) – Fixture Body Kit
- Coupling
- Distributor Box Cover x 2; Ø5″,10.3mm center hole
- Distributor box ; Ø5″ ,10.3mm center hole
- I. (6) – Candle Sleeve; H4 1/8″ XSN5026VBCDL4.125IN
- J. (6) – Bobeche; Ø4″,4pin,10.3mm center hole XSN5026VBBOB4IN
- K. (6) – 9 1/2″ Arms
- L. (1) – Finial; XSN5024VBFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>